-
Key Features:; STI "Reset" IP24 Housing IP24 Rated DIL Switched Addressed Includes Backbox and RF Wall Plate -
STI “Reset” IP67 Housing IP67 Rated DIL Switched Addressed
-
STI IP24 housing MCP DIL Switch Addressed Robust Fully Modulated AS Communications Protocol
-
STI waterproof IP67 housing MCP DIL Switch Addressed Robust Fully Modulated AS Communications Protocol
-
Key Features:; Resettable operating element Easy access, front reset mechanism E-Z fit connector system for installation Ergonomic reset key EN 54-11 & EN 54-17 Certified (Red version only) 170° viewable LED Continuity link for cable insulation testing Suitable for semi flush or surface mounting; The address of each call point is set at the commissioning stage by means of a DIL switch. A solid red alarm LED is provided on the manual call point. This LED is controlled independently of the call point, by the control panel. The LED will flash yellow if there is a fault and flash green when the device is polled. Discovery and CoreProtocol configurable. Once activated, the Intelligent Manual Call Point can be reset by inserting the reset key into the front facing LED, turning clockwise until a positive click and reset occurs. The Intelligent Manual Call Point incorporates a short circuit isolator which will ensure its operation in the event of a short circuit fault on the loop. Isolator operation is indicated by a solid yellow LED. This manual call point helps reduce installation time as all the initial installation cabling is wired to a removable terminal block which fits neatly in the back of the manual call point.
-
Fast response Integral short-circuit isolator Bi-coloured status LED Non-frangible element fitted as standard (conforms to EN54) Addressed with TCH-B100 Hand Held Programmer Surface or flush mounting (if surface mounting, requires SR MOUNTING BOX, sold separately) Different colour options available LPCB Approved to EN54
-
Key Features:; Unique ‘Plug & Play’ installation concept Integral loop isolation Analogue addressable communications Fully compliant with EN54, Part 11 Backward compatibility Integral LED
-
Modern stylish design Complies with EN54 Part11 Resettable or frangible operating elements Single maintenance tool Plug in loop connection
-
Features; IP 67 rating Addressable Complies with BS 5839 Part 2 and EN 54 Part 11 System test facility via test key Operated by finger pressure
-
‘Plug and Play’ terminal connections for fast wiring Continuity link for wiring test before commissioning Reports an alarm in under 0.2 seconds Resettable element
-
-
Key Features:; ‘Plug and Play’ terminal connections for fast wiring Continuity link for wiring test before commissioning Reports an alarm in under 0.2 seconds Resettable element
