-
Key Features Responds to stationary flames with no flicker Sensitive to UV and low-frequency flickering IR radiation emitted by flames during combustion Compact flame detector which fits into Discovery or XP95 bases Loop-powered False alarms due to electrical discharges from lightning or arc welding and flickering sunlight are minimised -
The Glavanic barrier is available in the XP95 IS range and the Orbis IS range. It can be installed in safe areas and ensures system integrity. Apollo Fire Detectors manufactures fire detectors designed for use in hazardous areas. This Product Guide gives information on the intrinsically safe (I.S.) version of the XP95 analogue, addressable range of smoke and heat detectors which have been approved by BASEEFA.
-
Apollo Indoor Intrinsically Safe Manual Call Point (470 ohm) - 55100-031APO The Conventional IS Manual Call Point has been designed to operate on conventional intrinsically safe fire detection systems. Designed specifically for use in atmospheres in which explosive mixtures are or may be present, certain design considerations must be observed
-
Pack of 10 transparent hinged covers which have been designed to fit on all Apollo manufactured manual call points. The covers help to provide extra security and protection against accidental operation.
-
Key Features: ATEX & IECEx certified: II 1 G CENELEC/IEC Certified: Ga Ex ia IIC T4 Selectable output options: Conventional two-wire, 4-20mA, Latching or Non-latching, Relay Contacts - Fire/Fault, Pre alarm Class 1 sensitivity to EN54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self-test Low power consumption IP65 rated Supply voltage 14 to 30Vdc Operating temperature -10C to +40C (T4) Operating temperature -10C to +55C
-
The Flame Detector Weather Shield protects the device from inclement conditions. Key Features Protects against water ingress Protects sensor from direct sunlight
-
Key Features: Sensitive to flickering IR radiation Detects through films of oil, dust, water and ice Responds to flickering flames, including those invisible to the naked eye Compatible with Discovery and XP95 protocols Remote optical self-test function 90 field of view Up to 40m coverage
-
The Flame Detector Bracket is an optional accessory for the Intelligent Flame Detectors. It is a stainless steel mounting bracket adjustable in two axis. Not suitable for Base Mounted Flame Detectors. Key Features: Allows flame detector to be mounted in any orientation.
-
Key Features Protects against water ingress Protects sensor from direct sunlight
-
Key Features: Continually corrects itself against building movement Controlled and adjusted from ground level Use XP95 Switch Monitor to interface it to an addressable loop
-
Key Features ATEX certified IECEx certified
-
Key Features: ATEX Certified: II 2 G D CENELEC/IEC Certified: EEx d - IIC T6- (Zones 1, 21, 2 and 22) Class 1 sensitivity to EN54-10 detects 0.1m2 fires at 25m Highest optical interference immunity Selectable output options: Conventional two-wire, 4-20mA, Relay Contacts - Fire/Fault, Pre alarm, Latching or Non-latching Selectable response speed Remote control self-test Low power consumption IP66 rated Supply voltage 14 to 30Vdc Operating temperature -10C to +55C
