-
Key Features: Grouped terminals to make wiring easy Two fixing centres LED alignment mark Cable stripping guide Detector locking mechanism Continuity link for voltage testing of zone wiring prior to commissioning Capable of switching up to 30V at 1A
-
Key Features: Grouped terminals to make wiring easy Two fixing centres LED alignment mark Cable stripping guide Detector locking mechanism Is used in 'Sav-Wire' systems
-
Features The Manual Call Point has an easily resettable element rather than a break glass. This call point is supplied with a backbox for surface mounting. It also features a unique ?Plug and Play? installation concept designed specifi cally to reduce installation time. The call point utilises a terminal block, where all installation cabling is terminated. The red Manual Call Point is approved to EN54-11 standard and complies with the requirements of the ATEX directive.
-
The Protocol Translator are installed in the safe area ensuring integrity of communication between control equipment and field devices and safety within the limits of BASEEFA approvals.
-
Key Features: Updated to include choice of tones: Apollo, slow whoop and DIN Two volume settings 92dB(A) and 100dB(A) Synchronisation of tones Individual and group addressing Loop Powered Red or White options IP21C rated
-
Key Features: Choice of tones on standard device: Apollo, Slow Whoop and DIN Two volume settings 92dB(A) and 100dB(A) Synchronisation of 'alert' and 'evacuate' tones Individual and group addressing Built in isolator IP21C
-
Key Features: Updated to include choice of tones: Apollo, slow whoop and DIN Two volume settings 92dB(A) and 100dB(A) Synchronisation of tones Individual and group addressing Loop Powered Red or White options IP66 rated
-
Key Features: Choice of tones on standard device: Apollo, Slow Whoop, and DIN IP66 rated Two Volume settings 92dB(A) and 100dB(A) Synchronisation of 'alert' and 'evacuate' tones Individual and group addressing Built in isolator
-
The Reflective Beam Detector Backbox allows easy first fixing of the cabling and terminations to the Intelligent Reflective Beam Detector. The backbox can be surface or flush mounted. Key Features Aesthetically pleasing
-
Key Features: Resettable element for testing Easy access, front reset mechanism A unique, ergonomically designed Key for resetting and front cover removal
-
The duct smoke detector is designed to operate in ducts with a width of between 300mm and 3000mm. A sampling tube of 360mm, suitable for duct widths up to 540mm, is supplied as standard. Longer sampling tubes may be ordered separately.
-
Key Features: Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under natural conditions Wide operating voltage Flashing LED and magnet operated test switch option Wide-operating voltage of 9?33 V DC Wide-operating and storage temperature of -20?C to +60?C Can be used on security systems Electrically and mechanically compatible with Series 60 Proven detection performance
-
Key Features Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under natural conditions Wide operating voltage Flashing LED and magnet operated test switch option
-
Key Features: Responds to stationary flames with no flicker Sensitive to UV radiation emitted by flames during combustion Compact flame detector which fits into Series 65 bases Zone-powered
-
-
Key Features Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under natural conditions Wide operating voltage Flashing LED and magnet operated test switch option Product Codes Descriptions 55000-126APO Series 65 BR Heat Detector with Flashing LED 55000-125APO Series 65 BR Heat Detector with Flashing LED and Magnetic Test Switch 55000-131APO Series 65 CR Heat Detector with Flashing LED
-
Key Features: For use with Series 65 or Orbis detectors Operates in air speeds of 0.5m/s to 20m/s Transparent cover to view detector head LED Integral smoke test port Volt-free contacts
-
Key Features: Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under natural conditions Wide operating voltage Flashing LED and magnet operated test switch option
-
Key Features: Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under natural conditions Wide operating voltage
-
Key Features: Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under natural conditions Wide operating voltage Flashing LED and magnet operated test switch option
-
Key Features Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under natural conditions Wide operating voltage Flashing LED and magnet operated test switch option
-
Key Features Detector locking mechanism One way fit Easy to wire Contains an earth connector
-
Key Features Detector locking mechanism One way fit Easy to wire Contains an earth connector
-
Key Features: Wide operating voltage Advanced electronic technology Flashing LED option Magnetic test switch option Can be used on security systems Electrically compatible with Series 60 Mechanically compatible with Series 60 Proven detection performance Designed to meet approvals worldwide Range of bases available
-
Key Features: 'Plug and play' terminal connections for fast wiring Resettable element
-
Key Features Responds well to fast burning, flaming fires Designed to operate in a variety of environments Flashing LED and magnet operated test switch option
-
Key Features Responds well to slow-burning, smouldering fires Well-suited to bedrooms and escape routes Unaffected by wind or atmospheric pressure Flashing LED and magnet operated test switch option
-
Key Features Detector locking mechanism One-way fit Easy to wire Contains an earth connector
-
This base adapter is used to allow Orbis detectors from the conventional range to be fitted to an existing Series 65 base. The apator helps to eliminate the need for the existing system to be rewired.
-
Key Features EN 54-23 approved Flash Colour: Red or White Synchronised Flash IP65 (deep base) Product Codes Description 29600-800 Sonos Pulse Wall VAD, Deep Base, Red Body/White Flash (W-3.1-11.3) 29600-801 Sonos Pulse Wall VAD, Deep Base, Red Body/Red Flash (W-2.4-7.5) 29600-802 Sonos Pulse Ceiling VAD, Shallow Base, White Body/White Flash (C-3-15) 29600-803 Sonos Pulse Ceiling VAD, Shallow Base, White Body/Red Flash (C-3-8.9) 29600-804 Sonos Pulse Wall Sounder VAD, Shallow Base, Red Body/White Flash (W-3.1-11.3) 29600-805 Sonos Pulse Wall Sounder VAD, Shallow Base, Red Body/Red Flash (W-2.4-7.5) 29600-806 Sonos Pulse Wall Sounder VAD, Deep Base, Red Body/White Flash (W-3.1-11.3) 29600-807 Sonos Pulse Wall Sounder VAD, Deep Base, Red Body/Red Flash (W-2.4-7.5)
-
Key Features For use with conventional systems A choice of 32 tones including all the major international standards Simple First Fix installation Volume control - typical 8dB
-
Key Features For use with conventional systems A choice of 32 tones including all the major international standards Simple First Fix installation
-
Key Features: Low profile design Utilises digital CoreProtocol communications Compatible with Discovery and XP95 systems Integrated switchable isolator as standard 8-way DIL switch addressing Drift compensation FasTest for quicker testing Tricoloured LED status indicator Polycarbonate moulding for colour stability and strength Comprehensively tested to exceed EN 54-7 and EN 54-17 standards Locking mechanism (grub screw)
-
The Soteria Dimension Mounting Box is moulded from white flame-retardant polycarbonate. Positions for either side or top cable entry are marked on the outside of the Mounting Box to ensure correct cable positioning.
-
Key Features: Low profile design Utilises digital CoreProtocol communications Compatible with Discovery and XP95 systems Integrated switchable isolator as standard 8-way DIL switch addressing Drift compensation FasTest for quicker testing Tricoloured LED status indicator Comprehensively tested to exceed EN 54-7 and EN 54-17 standards Ruggedized metal face plate which is secured with anti-tamper screws Designed and tested to meet the requirements of Ministry of Justice specification STD/E/SPEC/038 Independently certified to DHF TS001 for anti-ligature use in specialist areas
-
Key Features: Dual heat sensors Utilises digital CoreProtocol communications Compatible with XP95 and Discovery systems Compatible with existing fire control panels Mechanically compatible with existing bases Available with or without integrated switchable isolator Tri-coloured LED status indicator Polycarbonate moulding for colour stability and strength Comprehensively tested to exceed EN 54-5 standard FasTest for quicker testing of detectors XPERT card addressing or auto addressing Locking mechanism (grub screw) Please Note: Not all features are available when SOTERIA? devices are connected to an XP95 or Discovery fire control panel.