-
Key Features:; Easy swap replacement filter Fits VLC, VLF, VLP and VLS VESDA detectors Available singly or in packs of 20 90 mm x 63 mm x 30 mm (3.5 in. x 2.5 in. x 1.2 in.) -
Easy swap replacement filter Fits VLC, VLF, VLP and VLS VESDA detectors Available singly or in packs of 20 90 mm x 63 mm x 30 mm (3.5 in. x 2.5 in. x 1.2 in.)
-
Where the IAS is fitted with two point detectors, insert two baffles. Where the IAS is fitted with a single point detector, insert a blanking baffle.
-
1. Remove the transparent cover using the corner stud key. 2. Lift out the foam filter element from the filter tube using tweezers or long nosed pliers. 3. Fit a new filter element. Ensure that the filter is not compressed during fitting and that it is positioned flush with the top of the filter tube. 4. Replace the transparent cover.
-
1. Remove the transparent cover using the corner stud key. 2. Lift out the foam filter element from the filter tube using tweezers or long nosed pliers. 3. Fit a new filter element. Ensure that the filter is not compressed during fitting and that it is positioned flush with the top of the filter tube. 4. Replace the transparent cover.
-
-
-
-
-
-
-
User friendly menu system Supports multiple languages Single point access to entire VESDAnet system Alarm and fault simulation Shows wiring order Locates communications failures Password security Hand held or remote mounting Automatic Logoff when inactive Backlit LCD screen
-
PC-Link HLI Sliding Windows RS232 Interface (For VSM, V-Config & VSC Software)
-
-
-
Quick and simple to install Provides seamless VESDAnet fault tolerant communication Minimal configuration required before operation Diagnostic LED indicators (visible when case removed) Fully transferrable to another VLF detector
-
Available in three sizes: 0.5A / 7Ahr,0.5A / 14Ahr and 2A / 38Ahr Temperature compensated charging to maximise battery life Designed to blend in with Xtralis detectors Knockouts designed to line up with Xtralis detectors LED indication on 2A and 5A units Relay outputs for connection to the VESDA general-purpose input. VdS Approved CE Approved EN54-4:1997+A1:2002+A2:2006
-
Available in three sizes: 0.5A / 7Ahr,0.5A / 14Ahr and 2A / 38Ahr Temperature compensated charging to maximise battery life Designed to blend in with Xtralis detectors Knockouts designed to line up with Xtralis detectors LED indication on 2A and 5A units Relay outputs for connection to the VESDA general-purpose input. VdS Approved CE Approved EN54-4:1997+A1:2002+A2:2006
-
Available in three sizes: 0.5A / 7Ahr,0.5A / 14Ahr and 2A / 38Ahr Temperature compensated charging to maximise battery life Designed to blend in with Xtralis detectors Knockouts designed to line up with Xtralis detectors LED indication on 2A and 5A units Relay outputs for connection to the VESDA general-purpose input. VdS Approved CE Approved EN54-4:1997+A1:2002+A2:2006
-
User (USR) is only able to view parameters, check status, alarms and reset the system. Administrator (ADM) has access to most commands and programming parameters. Distributor (DST) is the topmost level and has unlimited access to all commands and parameters in the system. Lost PIN numbers can be overcome by obtaining a once only pass number from your Xtralis VESDA dealer.
-
Provides Immediate Status Reporting for a Single VESDA Zone. Allows Zone Control of Assigned VESDA Detector. High Intensity Alarm LEDs. Remote Relay Option. 20-Segment Vertical Bar Graph Display. Alarm Threshold Indicators. Built-In Sounder for Audible Warning. Comprehensive Fault Reporting. Multi-mode Numeric Display (defaults to smoke obscuration). Recessed Mounting Option.
-
-
Provides Immediate Status Reporting for a Single VESDA Zone. Allows Zone Control of Assigned VESDA Detector. High Intensity Alarm LEDs. Remote Relay Option. 20-Segment Vertical Bar Graph Display. Alarm Threshold Indicators. Built-In Sounder for Audible Warning. Comprehensive Fault Reporting. Multi-mode Numeric Display (defaults to smoke obscuration). Recessed Mounting Option.
-
