Alarm flag for fast alarm reporting Alarm address for fast location of alarm XPERT 7 Card addressing Electronics-free base Easy installation Elegant design; XP95, Discovery and CoreProtocol compatible Responds well to slowburning, smouldering fires Well-suited to bedrooms and escape routes Unaffected by wind or atmospheric pressure

Key Features:; Optical technology - responds quickly to slow smouldering fires LPCB and VdS approved CE marked Designed for use with the Firewatch singe and two loop fire alarm panels Self- extinguishing white polycarbonate case Unaffected by wind or atmospheric pressure Supply voltage: 17 to 28 Volts dc Operating temperature: -20°C to +60°C IP23D rating

Brand Information; Responds to smouldering and flaming fires Less susceptible to false alarms caused by steam and dust Five response modes Remote test feature

Responds well to fast-burning, flaming fires Designed to operate in a variety of environments Resilient to dust Five response modes Remote test feature

Mode 1 – has very high smoke sensitivity combined with high heat sensitivity. This gives a high overall sensitivity to both smouldering and flaming fires. Mode 2 – has a smoke sensitivity similar to that of a normal optical smoke detector. This mode is therefore equivalent to a standard optical detector. It is suitable for applications in which wide temperature changes occur under normal conditions. Mode 3 – has moderate smoke sensitivity combined with a moderate sensitivity to heat. This combination is considered the optimum for most general applications since it offers good response to both flaming and smouldering fires. Mode 4 – has lower than normal smoke sensitivity combined with high heat sensitivity. This makes it suitable for applications in which a certain amount of fumes or smoke is considered normal. Mode 5 – has no smoke sensitivity at all but gives a pure heat detector response meeting the response time requirements for a Class A1R detector in the European Standard EN 54- 5. In this mode the detector will respond to slowly changing temperatures and has a ‘fixed temperature’ alarm threshold at 58OC. The analogue value in this mode will give the approximate air temperature over the range 15OC to 55ºC. In Mode 5 the smoke sensor is still active though it does not contribute to the analogue signal. As a consequence, if the detector is used in a dirty or smoky environment the optical sensor drift flag may be activated in the heat only mode.; Ideal for a wide range of applications Enhanced false alarm management Recommended, in specific modes, for hotel bedrooms and hospital wards Unaffected by wind or atmospheric pressure Well-suited to sensitive environments Five EN 54 approved response modes Heat only and optical only options Remote test feature

Responds well to slowburning, smouldering fires Well-suited to bedrooms and escape routes Unaffected by wind or atmospheric pressure Five response modes Remote test feature