Addressable Audio/Visual Alarm Device From Reputable Brands
It’s crucial that the audio and visual warning devices in your building are fully-functioning to prevent an accident, Only the very best addressable Audio/Visual Alarm devices can all be found here at J K Fire.
-
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Automatic synchronisation of sounder Low current draw enables more devices on loop Adjustable volume control (on device or from panel) Intense strobe output Deep and high IP base options Pure White or Ivory body colours Common base with detectors (B501AP) Morley IAS Protocol 32 tone selection to cover many markets (on device or from panel) -
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Common base with detectors (B501AP) Morley IAS Protocol 32 tone selection to cover many markets Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Common base with detectors (B501AP) Morley IAS Protocol 32 tone selection to cover many markets Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Large cable access EN54-3 Approved Rear or surface cable entry Loop continuity spring Common base with detectors (B501AP) Morley IAS Protocol 32 tone selection to cover many markets Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Automatic synchronisation of sounder and strobe Common base with detectors (B501AP) Morley IAS Protocol 32 tone selection to cover many markets (on device or from panel) Positive “poke yoke” engagement Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Large cable access EN54-3 approved Rear or surface cable entry Loop continuity spring Automatic synchronisation of sounder and strobe Common base with detectors (B501AP) Morley IAS Protocol 32 tone selection to cover many markets (on device or from panel) Positive “poke yoke” engagement Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Morley IAS Analogue Addressable Protocol Clear Lens Red Flash EN54-23 Compliant Requires B501AP base for installs
-
Key Features; High output programmable sounder base and sounder beacon base One point of installation for detector, isolator, sounder & beacon Loop powered from the MX Technology® Digital Loop High brightness Multi-LED Beacon Software programmable 15 Tones and 2 Flash Rates Integral line isolator RSM (Reflective Sound Monitoring) Can be used as a standalone device using the sounder blanking cap
-
NFXI-BSF-WC Notifier Loop Powered Base Sounder Beacon & Isolator; Faster installation - The large cable access, rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation. Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security. Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident. Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options, white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer. Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials, designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounder/beacon can be added without re-wiring. Reduced inventory count - Notifier’s Opal AV range now utilizes the B501AP system base, - common to detectors. The Opal AV range is designed to maximise the features of Notifier’s advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder, sounder & beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.
-
Faster installation - The large cable access, rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation. Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security. Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident. Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options, white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer. Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials, designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounder/beacon can be added without re-wiring. Reduced inventory count - Notifier’s Opal AV range now utilizes the B501AP system base, - common to detectors. The Opal AV range is designed to maximise the features of Notifier’s advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder, sounder & beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.
-
Faster installation - The large cable access, rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation. Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security. Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident. Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options, white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer. Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials, designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounder/beacon can be added without re-wiring. Reduced inventory count - Notifier’s Opal AV range now utilizes the B501AP system base, - common to detectors. The Opal AV range is designed to maximise the features of Notifier’s advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder, sounder & beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.
-
Faster installation - The large cable access, rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation. Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security. Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident. Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options, white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer. Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials, designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounder/beacon can be added without re-wiring. Reduced inventory count - Notifier’s Opal AV range now utilizes the B501AP system base, - common to detectors. The Opal AV range is designed to maximise the features of Notifier’s advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder, sounder & beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.
-
Faster installation - The large cable access, rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation. Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti tamper feature giving added security. Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident. Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options, white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer. Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials, designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounder/beacon can be added without re-wiring. Reduced inventory count - Notifier’s Opal AV range now utilizes the B501AP system base, - common to detectors. The Opal AV range is designed to maximise the features of Notifier’s advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder, sounder & beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.
-
Key Features:; IP65 rated Type B Outdoor Beacon With/Without -ve Isolator* EEPROM Addressed (Programmer) FSK Signalling Protocol Beacon Rating W 2.4-7.5 / 135m3
-
Key Features:; IP65 rated EEPROM Addressed (Programmer) FSK Signalling Protocol Beacon Rating W 2.4-7.5 / 135m3
