Addressable Audio/Visual Alarm Device From Reputable Brands
It’s crucial that the audio and visual warning devices in your building are fully-functioning to prevent an accident, Only the very best addressable Audio/Visual Alarm devices can all be found here at J K Fire.
-
Key Features:; High output LED technology ensures optimum light output and low power requirements High efficiency piezo disk and horn profile generate powerful sound output Features Advanced protocol controllable sound output, tone selection, group polling, independent sound or strobe function Automatic synchronization of sounder and strobe Large cable access Rear or surface cable entry Loop continuity spring Simple twist fit onto universal B501AP base (positive “poke yoke” engagement) Anti-tamper feature In-built isolation options Address tag for clear indication Single point of installation – saves time, cost & inventory Low current draw enables more devices on loop Adjustable volume control (on device or from panel) Rotary wheels for clear address indication Clear lens with red flash -
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Common base with detectors (B501AP) Device protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols 32 tone selection to cover many markets Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Common base with detectors (B501AP) Device protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols 32 tone selection to cover many markets Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Automatic synchronisation of sounder and strobe Common base with detectors (B501AP) Device protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols 32 tone selection to cover many markets (on device or from panel) Positive “poke yoke” engagement Address tag for clear indication Anti-tamper feature Simple familiar rotary wheel address controls
-
Key Features:; This product is not EN54-23 approved so can’t be used as a VAD EN54-3 approved Large cable access Rear or surface cable entry Loop continuity spring Automatic synchronisation of sounder and strobe Common base with detectors (B501AP) Device protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols 32 tone selection to cover many markets (on device or from panel) Positive “poke yoke” engagement Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; This product is not EN54-23 approved so can’t be used as a VAD EN54-3 approved Large cable access Rear or surface cable entry Loop continuity spring Automatic synchronisation of sounder and strobe Common base with detectors (B501AP) Device protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols 32 tone selection to cover many markets (on device or from panel) Positive “poke yoke” engagement Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Automatic synchronisation of strobe Positive “poke yoke” engagement Address tag for clear indication Anti-tamper feature Simple familiar rotary wheel address controls Common base with detectors (B501AP) Device protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols
-
A compact and discrete solution One point of installation for detector and sounder with no addition wiring Low power with up to 250 sounders on a single loop Provides uncompromised system design solutions Simple to select the tone and volume using switches No special training or tools needed 9 selectable tones 4 selectable volumes A locking pin supplied with the base which prevents the unauthorized removal of the detector Replace legacy 802sb and it is compatible with 800 series detectors. Can be used for service and repair or as part of a planned upgrade path
-
Loop Powered - Reduced installation costs High Output/Low consumption - Lower lifetime costs Indoor and Outdoor models - Same sounder tones in all areas Sounder/LED Beacon Version - DDA Compliant 16 Tones and 2 Flash rates - Suits individual requirements Reflective Sound Monitoring RSM - Reassurance that ALL sounders are working Integral Line Isolator - Saves cost and installation time; Models Available
-
Key Features:; Weight 228g Humidity: up to 95% (non- condensing) Operating temperature: -10 Celsius to +55 Use only with ZX/MX Fire Alarm Controllers
-
Key Features:; Weight 228g Humidity: up to 95% (non- condensing) Operating temperature: -10 Celsius to +55 Use only with ZX/MX Fire Alarm Controllers
-
A compact and discrete solution One point of installation for detector, sounder and visual indicator with no additional wiring Reflective Sound Monitoring (RSM) Light is electronically monitored by the control panel Automatic self-test Independent addressable control of the sounder and beacon Built-in line isolator Select the tone, volume and flash rate using panel configuration software 15 selectable tones. Allows users to select the tone with which they are most familiar Realistic conventional bell tone 4 selectable volumes 2 selectable flash rates Different tones can be used for fire alarm and class change VIDs and sounders are synchronised over the entire loop A locking pin supplied with the base which prevents the unauthorized removal of the detector Replace legacy LPSB3000 and LPAV3000
-
A compact and unobtrusive sounder solution Reflective Sound Monitoring (RSM) Light is electronically monitored by the control panel Automatic self-test Indoor and outdoor versions Indoor models can be semi-flush or surface mounted including a choice of shallow or deep back box IP rated option has a deep surface back box Power and data from the loop. No additional wiring or power supplies required Built-in line isolator 16 selectable tones Realistic conventional bell tone 2 selectable volumes 2 selectable flash rates Select the tone volume and flash rate using panel configuration software Independent addressable control of the sounder and beacon Different tones can be used for pre alarm and class change Aesthetically pleasing rectangle wall mount option A locking pin/screw supplied which prevents unauthorized removal
-
A compact and discrete solution VAD approved to EN54-23 with two ranges, standard power and high power available High power option provides a larger VAD coverage volume compared to standard Reflective Sound Monitoring (RSM) Reflective Light Monitoring (RLM) Automatic self-test Shorter light pulse for faster response Optimise the system design for lowest power requirements and lowest cost installation Triple light source One point of installation for detector, sounder and visual indicator with no additional wiring Independent addressable control of the sounder and beacon Built-in line isolator Select the tone, volume and flash rate using panel configuration software 15 selectable tones. Allows users to select the tone with which they are most familiar. Realistic conventional bell tone 2 selectable volumes 2 selectable flash rates Different tones can be used for fire alarm and class change VADs and sounders are synchronised over the entire loop A locking pin supplied with the base which prevents the unauthorized removal of the detector Provides an EN54-23 approved upgrade path for legacy systems
-
Key Features:; A compact and unobtrusive sounder solution Reflective Sound Monitoring (RSM) Reflective Light Monitoring (RLM) Automatic self-test Shorter light pulse for faster response Indoor and outdoor versions Indoor models can be semi-flush or surface mounted including a choice of shallow or deep back box IP rated option has a deep surface back box for use with suitable IP-rated glands and cabling Power and data from the loop. No additional wiring or power supplies required Built-in line isolator 16 selectable tones Realistic conventional bell tone 2 selectable volumes 2 selectable flash rates Select the tone volume and flash rate using panel configuration software Independent addressable control of the sounder and beacon Different tones can be used for fire alarm and class change Rectangle wall mount for an aesthetically pleasing option A locking pin/screw supplied which prevents unauthorized removal
