-
The device also has the functionality to test the diagnostics and integrity of the loop to find earth faults etc. The device offers fault-finding capabilities that allow for time spent on-site to be cut down during the commissioning stage of the system installation. The result of this is time reduced on-site for the end-user which reduces the overall costs of installing Apollo systems. -
Vesda VSP-005 Filter Cartridge (Singular) The VESDA replacement filter cartridge (VSP-005 for single units and VSP-025 for a pack of 20) is used to replace filter cartridges in VESDA LaserCOMPACT, LaserFOCUS, LaserPLUS and LaserSCANNER detectors. One model fits all detectors. Key Features:
- Easy swap replacement filter
- Fits VLC, VLF, VLP and VLS VESDA detectors
- Available singly or in packs of 20
- 90 mm x 63 mm x 30 mm (3.5 in. x 2.5 in. x 1.2 in.)
-
The LaserSCANNER is similar to the standard LaserPLUS detector, but also includes a valve mechanism in the inlet manifold and software to control the airflow from the four VESDA sectors (pipes). This configuration enables a single VESDA zone to be divided into four separate sectors, for example, distinguishing between separate voids within a room or seperate cabinets within the same room.
-
The LaserSCANNER is similar to the standard LaserPLUS detector, but also includes a valve mechanism in the inlet manifold and software to control the airflow from the four VESDA sectors (pipes). This configuration enables a single VESDA zone to be divided into four separate sectors, for example, distinguishing between separate voids within a room or seperate cabinets within the same room.
-
The LaserSCANNER is similar to the standard LaserPLUS detector, but also includes a valve mechanism in the inlet manifold and software to control the airflow from the four VESDA sectors (pipes). This configuration enables a single VESDA zone to be divided into four separate sectors, for example, distinguishing between separate voids within a room or seperate cabinets within the same room.
-
The LaserSCANNER is similar to the standard LaserPLUS detector, but also includes a valve mechanism in the inlet manifold and software to control the airflow from the four VESDA sectors (pipes). This configuration enables a single VESDA zone to be divided into four separate sectors, for example, distinguishing between separate voids within a room or seperate cabinets within the same room.
-
The LaserSCANNER is similar to the standard LaserPLUS detector, but also includes a valve mechanism in the inlet manifold and software to control the airflow from the four VESDA sectors (pipes). This configuration enables a single VESDA zone to be divided into four separate sectors, for example, distinguishing between separate voids within a room or seperate cabinets within the same room.
-
The LaserSCANNER is similar to the standard LaserPLUS detector, but also includes a valve mechanism in the inlet manifold and software to control the airflow from the four VESDA sectors (pipes). This configuration enables a single VESDA zone to be divided into four separate sectors, for example, distinguishing between separate voids within a room or seperate cabinets within the same room.
-
The VESDA LaserFOCUS detector delivers the most advanced air sampling smoke detection technology to small environments - cost effectively. The VLF-250 model protects areas up to 250 sq.m. In addition to the features found in all VESDA Laser products, the VESDA LaserFOCUS provides a new range of features & built-in intelligence that allow quick installation, commissioning and servicing.
-
The VESDA LaserFOCUS detector delivers the most advanced air sampling smoke detection technology to small environments - cost effectively. The VLF-500 model protects areas up to 500 sq.m. In addition to the features found in all VESDA Laser products, the VESDA LaserFOCUS provides a new range of features & built-in intelligence that allow quick installation, commissioning and servicing.
-
The VESDA-E VEA Local Relay StaX allows signalling of alarm location from the detector via relays and provides mounting of fire panel loop input modules inside the enclosure. It is directly powered and controlled from the detector. Depending on the configuration a VEA detector can power and control up to two (2) Expansion StaX and up to three (3) Relay StaX. Each Relay StaX provides 40 relay connections corresponding to 40 tubes on a VEA detector or Expansion StaX providing full addressability.
-
The VESDA VLI by Xtralis is an industry first early warning aspirating smoke detection (ASD) system, designed to protect industrial applications and harsh environments of up to 2000m2 (20,000 sq. ft.). The VLI detector combines a fail-safe Intelligent Filter (patent pending) with an advanced clean-air barrier for optics protection allowing the use of absolute detection and a long detection chamber life without the need for recalibration.
-
The VESDA VLI by Xtralis is an industry first early warning aspirating smoke detection (ASD) system, designed to protect heavy industrial applications with dirty or harsh environments of up to 2000m2 (20,000 sq. ft.). Until now ASD has not been recommended in challenging dirty environments, however the new Vesda VLI removes any previous boundaries enabling the facility of very early smoke detection in almost any conditions. The VLI detector combines a fail-safe Intelligent Filter (patent pending) with an advanced clean-air barrier for optics protection allowing the use of absolute detection and a long detection chamber life without the need for recalibration.
-
The VESDA-E VES can identify and monitor smoke density by individual sampling pipe (sector) which allows a single zone to be divided into four separate sectors; for example, distinguishing between separate aisles within a data room. Sector addressability enables the user to respond to a potential fire event quickly by reducing the search area. The VESDA-E VES has four programable alarm thresholds (Alert, Action, Fire 1 and Fire 2) per pipe that allows flexible field application. After the detector identifies the first sector to reach the Alert threshold it continues to sample from all sectors to report real time status per sector via the intuitive touch screen display. Built on the Flair detection technology and years of application experience the VESDA-E VES detector delivers very early warning with the best in class dust rejection throughout its lifetime.
-
The VESDA-E VES can identify and monitor smoke density by individual sampling pipe (sector) which allows a single zone to be divided into four separate sectors; for example, distinguishing between separate aisles within a data room. Sector addressability enables the user to respond to a potential fire event quickly by reducing the search area. The VESDA-E VES has four programable alarm thresholds (Alert, Action, Fire 1 and Fire 2) per pipe that allows flexible field application. After the detector identifies the first sector to reach the Alert threshold it continues to sample from all sectors to report real time status per sector via the intuitive touch screen display. Built on the Flair detection technology and years of application experience the VESDA-E VES detector delivers very early warning with the best in class dust rejection throughout its lifetime.
-
The ICAM IAS Air-sampling Smoke Detection systems provide a flexible solution to meet the unique needs of numerous applications including industrial spaces such as cable tunnels, the tamper-proof and unobtrusive requirements of special accommodation, or can simply be used to replace spot (point) detectors in office environments. The IAS systems actively draw air from the protected area through sampling holes in a pipe network. Sampled air is then filtered before being analysed by conventional or analogue point detectors incorporated in the systems.
-
The ICAM IAS Air-sampling Smoke Detection systems provide a flexible solution to meet the unique needs of numerous applications including industrial spaces such as cable tunnels, the tamper-proof and unobtrusive requirements of special accommodation, or can simply be used to replace spot (point) detectors in office environments. The IAS systems actively draw air from the protected area through sampling holes in a pipe network. Sampled air is then filtered before being analysed by conventional or analogue point detectors incorporated in the systems.
-
The OSE-SPW is used as a preferred solution when 24 Vdc is close by. The company that revolutionized very early warning smoke detection with VESDA has reinvented smoke detection for open spaces with Open-area Smoke Imaging Detection (OSID). OSID by Xtralis provides reliable, cost-effective smoke detection for open spaces where fire detection presents unique challenges and where very early warning is not always the priority.
-
The company that revolutionized very early warning smoke detection with VESDA has reinvented smoke detection for open spaces with Open-area Smoke Imaging Detection (OSID). OSID by Xtralis provides reliable, cost-effective smoke detection for open spaces where fire detection presents unique challenges and where very early warning is not always the priority.
-
Using battery powered Emitters, with a guaranteed 5 year life, drastically reduce wiring and installation costs. The company that revolutionized very early warning smoke detection with VESDA has reinvented smoke detection for open spaces with Open-area Smoke Imaging Detection (OSID). OSID by Xtralis provides reliable, cost-effective smoke detection for open spaces where fire detection presents unique challenges and where very early warning is not always the priority.
-
The company that revolutionized very early warning smoke detection with VESDA has reinvented smoke detection for open spaces with Open-area Smoke Imaging Detection (OSID). OSID by Xtralis provides reliable, cost-effective smoke detection for open spaces where fire detection presents unique challenges and where very early warning is not always the priority.
-
The OSI-10 covers a distance of 30 - 150m with the OSE-SPW. This configuration is for a 1 on 1 system and is not suitable to work with high powered emitters. The company that revolutionized very early warning smoke detection with VESDA has reinvented smoke detection for open spaces with Open-area Smoke Imaging Detection (OSID). OSID by Xtralis provides reliable, cost-effective smoke detection for open spaces where fire detection presents unique challenges and where very early warning is not always the priority.
-
The VEU series of aspirating smoke detectors are the premium detector of the VESDA-E range. An Ultra-wide sensitivity range; 15 times greater than VESDA VLP, and provision for more sampling holes provide an increased coverage in high airflow applications by up to 40%. Considerably longer linear pipe runs and extended branched pipe network configurations cater perfectly to applications with higher ceilings providing an increased coverage by up to 80% whilst allowing convenient detector mounting for ease of service and maintenance. A range of revolutionary new features provide unsurpassed detection performance, flexibility, field programmability, connectivity and reduced total cost of ownership.
-
The VEU series of aspirating smoke detectors are the premium detector of the VESDA-E range. An Ultra-wide sensitivity range; 15 times greater than VESDA VLP, and provision for more sampling holes provide an increased coverage in high airflow applications by up to 40%. Considerably longer linear pipe runs and extended branched pipe network configurations cater perfectly to applications with higher ceilings providing an increased coverage by up to 80% whilst allowing convenient detector mounting for ease of service and maintenance. A range of revolutionary new features provide unsurpassed detection performance, flexibility, field programmability, connectivity and reduced total cost of ownership.
-
The VESDA-E VEP series of smoke detectors bring the latest and most advanced detection technology to provide very early warning and the best nuisance alarm rejection to a wide range of applications. Built on the Flair detection technology and years of application experience, VEP detectors deliver absolute calibration for lifetime performance and a range of revolutionary new features that deliver user value.
-
The VESDA-E VEP series of smoke detectors bring the latest and most advanced detection technology to provide very early warning and the best nuisance alarm rejection to a wide range of applications. Built on the Flair detection technology and years of application experience, VEP detectors deliver absolute calibration for lifetime performance and a range of revolutionary new features that deliver user value.
-
The VESDA-E VEP series of smoke detectors bring the latest and most advanced detection technology to provide very early warning and the best nuisance alarm rejection to a wide range of applications. Built on the Flair detection technology and years of application experience, VEP detectors deliver absolute calibration for lifetime performance and a range of revolutionary new features that deliver user value.
-
The VESDA-E VEA series of detectors combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors. They use patented air sampling points and multi-channel microbore air-sampling with three alarm sensitivity settings for the sampling points. As a multi-channel addressable system, the VEA detector can divide a protected space into sampling locations, enabling the localization of potential sources of fire for faster incident response.
-
The detectors are suitable for protection of areas where pinpoint location of fire events is essential, thus providing ideal fire detection solutions for healthcare, offices, education, retail, prisons and electrical cabinets. A wide range of features provide flexibility, field programmability, enhanced connectivity and reduced total cost of ownership.
-
The Scorpion head unit is permanently installed alongside the smoke detector.Key features include:
- Smoke tailored for functional testing of point type smoke detectors
- Adjustable smoke time to suit requirements of the system under test
- Clearing function enables rapid reset and reduces repeat alarms
- Scorp 2011 available for testing aspirating smoke detection systems
- Product Code: SCORP 1011-001
-
Key Benefits
- Up to 2 optical beam detectors per system controller
- Easifit Fix System
- Ground Level Control
- Laser Assisted Alignment
- Auto-Optimise Beam Alignment
-
Approvals:
- II 2 GD
- Ex db op is IIC T6 Gb
- Ex tb IIIC T85°C Db
- Ta = 20°C to +55°C
- Self check and automatic compensation
- Robust metal construction
-
Key Benefits
- Allows for 2 Detectors per System Controller
- Range 5 to 120 metres, configurable per set of Detectors
- Integral Laser Alignment in Receiver
- 2-wire Interface between Controller and Receiver
- Seperate Fire and Fault Relays per Detector
-
Key Benefits
- Single Compact Housing
- Area coverage 50 metre or 100 metre model available
- 12-24 Vdc Operation
- Low current Consumption
- Robust Construction
- Conforms to: BS5839 Part 5 and EN54 part 12, UL and VdS
-
Key Benefits:
- Integrated visible laser and auto-alignment for ultimate ease of alignment
- One standalone product – no specialist tools required
- Prevent nuisance alarms with Light Cancellation Technology™ which compensates for sunlight and artificial light sources
- One person installation – everything can be done by one person
- Contamination Compensation to correct for gradual build-up of dust on optics
-
Our most popular all-in-one detector tester, the Testifire 1001 enables functional testing of both smoke and heat sensors, making it multi-sensor detector tester. Functional smoke testing is carried out using the Testifire 1001 head unit and a TS3 smoke capsule. Testifire 1001 Kit Contains:
- 1 x Testifire 1000-001 Head Unit
- 1 x TS3-001 Smoke Capsule
- 2 x Solo 770-001 Battery Baton
- 1 x Solo 727-001 Multi-Voltage Fast Charger
