Conventional Ancillaries Device From Reputable Brands
IWe have the very latest ancillary devices that are compatible with a huge range of Addressable Fire Alarm Systems products can all be found here at J K Fire.
-
1, 2, 3 and 5 amp versions available For use with lead acid rechargeable batteries The units are factory adjusted to provide a 27.6Vdc output Large enclosure units available to hold 2 x 17Ah batteries Batteries not supplied -
1, 2, 3 and 5 amp versions available For use with lead acid rechargeable batteries The units are factory adjusted to provide a 27.6Vdc output Large enclosure units available to hold 2 x 17Ah batteries Batteries not supplied
-
1, 2, 3 and 5 amp versions available For use with lead acid rechargeable batteries The units are factory adjusted to provide a 27.6Vdc output Large enclosure units available to hold 2 x 17Ah batteries Batteries not supplied
-
Full Rated Current to Load + 0.5A battery charging Universal Mains Voltage Input 90V - 264V ac Mains and Battery Monitoring Deep Discharge Protection Electronic Overload Protection Volt Free Fault Output - 1 Mains Fail Volt Free Fault Output - 2 Battery Failure Output / Battery Fuse Failure Output Short Circuit or Low Voltage
-
Full Rated Current to Load + 0.5A battery charging Universal Mains Voltage Input 90V - 264V ac Mains and Battery Monitoring Deep Discharge Protection Electronic Overload Protection Volt Free Fault Output - 1 Mains Fail Volt Free Fault Output - 2 Battery Failure Output / Battery Fuse Failure Output Short Circuit or Low Voltage
-
Continuous full rated current to load Additional 0.5A to charge standby battery Universal mains input voltage 90-264Vac High efficiency electronics for reduced running costs and lower operating temperatures Installer safe design with all high voltage electronics fully shrouded Modular construction for ease of maintenance and installation Full electronic short circuit and overload protection on load output under mains operation Mains transient protection circuit Lid opening tamper detection Green Mains present LED Red Fault LED (dependant on model) Individually Fused Outputs (dependant on model).
-
Continuous full rated current to load Additional 0.5A to charge standby battery Universal mains input voltage 90-264Vac High efficiency electronics for reduced running costs and lower operating temperatures Installer safe design with all high voltage electronics fully shrouded Modular construction for ease of maintenance and installation Full electronic short circuit and overload protection on load output under mains operation Mains transient protection circuit Lid opening tamper detection Green Mains present LED Red Fault LED (dependant on model) Individually Fused Outputs (dependant on model).
-
Continuous full rated current to load Additional 0.5A to charge standby battery Universal mains input voltage 90-264Vac High efficiency electronics for reduced running costs and lower operating temperatures Installer safe design with all high voltage electronics fully shrouded Modular construction for ease of maintenance and installation Full electronic short circuit and overload protection on load output under mains operation Mains transient protection circuit Lid opening tamper detection Green Mains present LED Red Fault LED (dependant on model) Individually Fused Outputs (dependant on model).
-
Continuous full rated current to load Additional 0.5A to charge standby battery Universal mains input voltage 90-264Vac High efficiency electronics for reduced running costs and lower operating temperatures Installer safe design with all high voltage electronics fully shrouded Modular construction for ease of maintenance and installation Full electronic short circuit and overload protection on load output under mains operation Mains transient protection circuit Lid opening tamper detection Green Mains present LED Red Fault LED (dependant on model) Individually Fused Outputs (dependant on model).
-
Continuous full rated current to load Additional 0.5A to charge standby battery Universal mains input voltage 90-264Vac High efficiency electronics for reduced running costs and lower operating temperatures Installer safe design with all high voltage electronics fully shrouded Modular construction for ease of maintenance and installation Full electronic short circuit and overload protection on load output under mains operation Mains transient protection circuit Lid opening tamper detection Green Mains present LED Red Fault LED (dependant on model) Individually Fused Outputs (dependant on model).
-
Continuous full rated current to load Additional 0.5A to charge standby battery Universal mains input voltage 90-264Vac High efficiency electronics for reduced running costs and lower operating temperatures Installer safe design with all high voltage electronics fully shrouded Modular construction for ease of maintenance and installation Full electronic short circuit and overload protection on load output under mains operation Mains transient protection circuit Lid opening tamper detection Green Mains present LED Red Fault LED (dependant on model) Individually Fused Outputs (dependant on model).
-
Approved to EN54-4 by VdS 2 and 5 amp versions Separate battery housing and connection lead available Energy efficient design based on switch mode technology Sturdy 1.2mm powder coated steel enclosure with a hinged lid finished in white
-
Approved to EN54-4 by VdS 2 and 5 amp versions Separate battery housing and connection lead available Energy efficient design based on switch mode technology Sturdy 1.2mm powder coated steel enclosure with a hinged lid finished in white
-
Key Features:; Maximum range: 7 m
-
Certified by UL to EN54-4:1997 +A1 +A2. Up to 1.2A current to load at 27.6V dc nominal regulated output. Charging capability to support 1.2 to 7Ah batteries. Electronic overload protection shuts down output until overload or short circuit is removed. Battery Monitor detects battery missing, low battery, short-circuit or reverse connection or circuit impedance (Ri) in excess of 500mW, caused by connector or wiring problem/corrosion, within 4 hours. Battery charging circuit is energised only when a battery is correctly connected and the battery voltage is greater than 14 V. No loss of output during automatic connection of battery to load on loss of mains. Deep discharge protection disconnects battery from load when battery voltage falls below 21 V. Diagnostic indicator LED (Orange) (Internal). Fault indicator LED (Yellow) flashes on detection of output fault, battery fault, charger fault and mains failure. Mains indicator LED (Green) showing mains present Indicators check at start-up. Optional RS232 serial interface for fault reporting and diagnostics. Suitable to fit batteries up to 2 x 1.2Ah 'T' Box Power Supply - 300h x 240w x 63d (mm) Hinged Lid
