-
Hochiki YBO-BSB(WHT) Loop Powered Base Sounder with Beacon; Loop Powered with Single Loop Address - addressed automatically by Control Panel or via the TCH-B100 Hand Held Programmer Variable Sound Output 50 ~ 98 dB(A) (+/-2 dB(A)) output at 1 metre Sounder and Beacon can operate independently Fits Hochiki Standard or Isolator Base and supports ESP Sensors, Addressable Beacons and Addressable Remote Indicator 51 User-Selectable Tones (all tones EN54-3 compatible) Auto-Shutdown feature prevents noise-pollution
-
Hyfire HFI-EBS-05 Slave Sounder Base; Low current, high output local sounder Selection of 32 tones Tone and volume set via DIP switch Adjustable volume output Compatible with all Altair detectors 5 year product warranty Includes device identification tab Easy central cable entry
-
Hyfire HFI-EBSB-05 Slave Sounder Beacon Base; Low current, high output sounder Selection of 32 tones Tone and volume set via dip switch 360 degree visibility of VID Adjustable output volume Compatible with all Altair detectors 5 year product warranty Includes device identification tab Easy central cable entry
-
Employs fully digital Hyfire protocol Built in loop isolators Fully Intelligent Selection of 32 tones Synchronised sounder Adjustable volume output Auto-addressable Programmable via Device Programming Tool Compatible with all Altair detectors 5-year product warranty Includes device identification tab Easy central cable entry
-
Employs fully digital Hyfire protocol Built in loop isolators Offers full programming options Selection of 32 tones Synchronised sounder 360 degree visibility of VID when activated Adjustable volume output Auto-addressable via compatible panels Programmable via the Device Programming tool 5 year product warranty Includes device identification tab Easy central cable entry
-
5083101 - Beacon sounder Amber/Red. 24V DC mutable tone adjust facility. 1Hz Flash Rate. 5083150 - Beacon Sounder Red. 24V DC mutable tone adjust facility. 1Hz Flash Rate. 5083160 - Beacon Sounder Blue. 24V DC Not mutable tone adjust facility. 1Hz Flash Rate.
-
-
-
EN 54-3 compliant Suitable for 12 V and 24 V DC service voltage Synchronous sound trigger Volume adjustable to 2 levels at the device
-
EN 54-3 and 54-23 compliant Synchronous sound and flash trigger Volume adjustable to 2 levels at the device C & W category Signal range up to 6.0 m room width for wall mounting Signal range up to 8.9 m room diameter for ceiling mounting
-
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Automatic synchronisation of sounder Low current draw enables more devices on loop Adjustable volume control (on device or from panel) Intense strobe output Deep and high IP base options Pure White or Ivory body colours Common base with detectors (B501AP) Morley IAS Protocol 32 tone selection to cover many markets (on device or from panel)
-
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Common base with detectors (B501AP) Morley IAS Protocol 32 tone selection to cover many markets Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Common base with detectors (B501AP) Morley IAS Protocol 32 tone selection to cover many markets Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Large cable access EN54-3 Approved Rear or surface cable entry Loop continuity spring Common base with detectors (B501AP) Morley IAS Protocol 32 tone selection to cover many markets Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Large cable access Rear or surface cable entry Loop continuity spring Automatic synchronisation of sounder and strobe Common base with detectors (B501AP) Morley IAS Protocol 32 tone selection to cover many markets (on device or from panel) Positive “poke yoke” engagement Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Large cable access EN54-3 approved Rear or surface cable entry Loop continuity spring Automatic synchronisation of sounder and strobe Common base with detectors (B501AP) Morley IAS Protocol 32 tone selection to cover many markets (on device or from panel) Positive “poke yoke” engagement Address tag for clear indication Anti-tamper feature In-built isolation options Simple familiar rotary wheel address controls
-
Key Features:; Morley IAS Analogue Addressable Protocol Clear Lens Red Flash EN54-23 Compliant Requires B501AP base for installs
-
Key Features; High output programmable sounder base and sounder beacon base One point of installation for detector, isolator, sounder & beacon Loop powered from the MX Technology® Digital Loop High brightness Multi-LED Beacon Software programmable 15 Tones and 2 Flash Rates Integral line isolator RSM (Reflective Sound Monitoring) Can be used as a standalone device using the sounder blanking cap
-
NFXI-BSF-WC Notifier Loop Powered Base Sounder Beacon & Isolator; Faster installation - The large cable access, rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation. Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security. Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident. Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options, white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer. Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials, designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounder/beacon can be added without re-wiring. Reduced inventory count - Notifier’s Opal AV range now utilizes the B501AP system base, - common to detectors. The Opal AV range is designed to maximise the features of Notifier’s advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder, sounder & beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.
-
Faster installation - The large cable access, rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation. Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security. Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident. Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options, white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer. Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials, designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounder/beacon can be added without re-wiring. Reduced inventory count - Notifier’s Opal AV range now utilizes the B501AP system base, - common to detectors. The Opal AV range is designed to maximise the features of Notifier’s advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder, sounder & beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.
-
Faster installation - The large cable access, rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation. Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security. Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident. Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options, white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer. Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials, designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounder/beacon can be added without re-wiring. Reduced inventory count - Notifier’s Opal AV range now utilizes the B501AP system base, - common to detectors. The Opal AV range is designed to maximise the features of Notifier’s advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder, sounder & beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.
-
Faster installation - The large cable access, rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation. Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti-tamper feature giving added security. Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident. Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options, white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer. Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials, designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounder/beacon can be added without re-wiring. Reduced inventory count - Notifier’s Opal AV range now utilizes the B501AP system base, - common to detectors. The Opal AV range is designed to maximise the features of Notifier’s advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder, sounder & beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.
-
Faster installation - The large cable access, rear or surface cable entry options and innovative loop continuity spring all make for faster more cost effective installation. Reduced install errors and easy fault finding - devices are mounted using a positive push and turn engagement system and are supplied with an address tag for clear identification. Isolation is built-in to each device and addressing is made simple by familiar rotary wheel address controls. In addition each device incorporates an anti tamper feature giving added security. Excellent system performance - High light output and a selection of 32 sounder tones can be synchronised via the Notifier control panel to provide fast clear warning of a fire related incident. Flexible installation - The low current draw of the devices enables more devices on each loop. This combined with the wide range of devices and mounting options including deep and high IP options, white or red colour options and sounder volume controllable from the panel or the sounder itself all make for greater flexibility for the system designer. Reduced lifetime costs - each device in the Opal AV range is constructed from high quality UV stable materials, designed for impact resistance and years of trouble free operation. If changes to a system are required the universal system base means a sounder/beacon can be added without re-wiring. Reduced inventory count - Notifier’s Opal AV range now utilizes the B501AP system base, - common to detectors. The Opal AV range is designed to maximise the features of Notifier’s advanced digital Opal protocol but remains backward compatible with previous Notifier communication protocols so can be used for retrofit and replacement for older systems. Opal AV devices provide both standard wall mounting units and integrated base units allowing the direct fitting of Notifier detectors. Wall mounting units are available as a sounder, sounder & beacon combination and a beacon only with sounder colour options of both red and white. Integrated base sounder units are also available as either a sounder or a sounder and beacon combination in colours to match the detectors.
-
Key Features:; Wall or Base mounted sounder DIL Switch Addressed Robust Fully Modulated AS Communications Protocol