-
Key Features: It is possible to set individual control of the sounder and visual indicator Volume and tone settings can be selected from the control panel Electronic bell tone IMO 1A tone included -
Key Features: Resettable operating element Easy access, front reset mechanism Front facing accessible addressing for commissioning Ergonomic reset key and keyring hole Flashing Poling LED Option 170 viewable LED indicator
-
Key Features: Approved for use in the marine environment Five response modes for environmental adaptation Day/night switching for increased flexibility Drift compensation for false alarm reduction User programmability for data XPERT card addressing for increased security
-
Key Features: Ideal for a wide range of applications Enhanced false alarm management Recommended, in specific modes, for hotel bedrooms and hospital wards Unaffected by wind or atmospheric pressure Well-suited to sensitive environments Five EN 54 approved response modes Heat only and optical only options Remote test feature
-
Key Features: Responds well to slowburning, smouldering fires Well-suited to bedrooms and escape routes Unaffected by wind or atmospheric pressure Five response modes Remote test feature
-
Key Features: 15 tone pairs It is possible to set individual control of the sounder and visual indicator Volume and tone settings can be selected from the control panel Tones can be used for other purposes in addition to warning of fire, making the device ideal for use in schools etc. Soft start option, ideal for hospitals and nursing homes Group and global control for increased response time
-
Key Features: 4 pre-set message pairs, capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Key Features: 4 pre-set message pairs, capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Key Features: Four pre-set message pairs Capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Key Features: Four pre-set message pairs Capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Key Features: ATEX & IECEx certified: II2GD Ex d IIC T4 Gb EE tb IIICT135 ?C Db IP66 A21 (Zones 1, 21, 2 and 22) Selectable output options: Conventional two-wire, 4-20mA, Latching or Non-latching, Relay Contacts - Fire/Fault, Pre alarm Class 1 sensitivity to EN54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self-test Low power consumption IP66 rated Supply voltage 14 to 30Vdc Operating temperature -10C to +55C
-
Key Features: ATEX & IECEx certified: II2GD Ex d IIC T4 Gb Ex tb IIICT135 ?C Db IP66 A21 (Zones 1, 21, 2 and 22) Selectable output options: Conventional two-wire, 4-20mA, Latching or Non-latching, Relay Contacts - Fire/Fault, Pre alarm Class 1 sensitivity to EN54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self-test Low power consumption IP66 rated Supply voltage 14 to 30Vdc Operating temperature -10C to +55C
-
Key Features: ATEX Certified: II 2 G D CENELEC/IEC Certified: EEx d - IIC T6- (Zones 1, 21, 2 and 22) Class 1 sensitivity to EN54-10 detects 0.1m2 fires at 25m Highest optical interference immunity Selectable output options: Conventional two-wire, 4-20mA, Relay Contacts - Fire/Fault, Pre alarm, Latching or Non-latching Selectable response speed Remote control self-test Low power consumption IP66 rated Supply voltage 14 to 30Vdc Operating temperature -10C to +55C
-
Key Features ATEX certified IECEx certified
-
Key Features: Continually corrects itself against building movement Controlled and adjusted from ground level Use XP95 Switch Monitor to interface it to an addressable loop
-
The Flame Detector Bracket is an optional accessory for the Intelligent Flame Detectors. It is a stainless steel mounting bracket adjustable in two axis. Not suitable for Base Mounted Flame Detectors. Key Features: Allows flame detector to be mounted in any orientation.
-
Key Features Protects against water ingress Protects sensor from direct sunlight
-
The Flame Detector Weather Shield protects the device from inclement conditions. Key Features Protects against water ingress Protects sensor from direct sunlight
-
Key Features: Sensitive to flickering IR radiation Detects through films of oil, dust, water and ice Responds to flickering flames, including those invisible to the naked eye Compatible with Discovery and XP95 protocols Remote optical self-test function 90 field of view Up to 40m coverage
-
Pack of 10 transparent hinged covers which have been designed to fit on all Apollo manufactured manual call points. The covers help to provide extra security and protection against accidental operation.
-
Key Features: ATEX & IECEx certified: II 1 G CENELEC/IEC Certified: Ga Ex ia IIC T4 Selectable output options: Conventional two-wire, 4-20mA, Latching or Non-latching, Relay Contacts - Fire/Fault, Pre alarm Class 1 sensitivity to EN54-10 detects 0.1m2 fire at 25m High optical interference immunity Selectable response speed Optical self-test Low power consumption IP65 rated Supply voltage 14 to 30Vdc Operating temperature -10C to +40C (T4) Operating temperature -10C to +55C
-
The Glavanic barrier is available in the XP95 IS range and the Orbis IS range. It can be installed in safe areas and ensures system integrity. Apollo Fire Detectors manufactures fire detectors designed for use in hazardous areas. This Product Guide gives information on the intrinsically safe (I.S.) version of the XP95 analogue, addressable range of smoke and heat detectors which have been approved by BASEEFA.
-
Apollo Indoor Intrinsically Safe Manual Call Point (470 ohm) - 55100-031APO The Conventional IS Manual Call Point has been designed to operate on conventional intrinsically safe fire detection systems. Designed specifically for use in atmospheres in which explosive mixtures are or may be present, certain design considerations must be observed
-
Key Features: Responds to stationary flames with no flicker Sensitive to low-frequency flickering IR radiation emitted by flames during combustion Compact flame detector which fits into Discovery or XP95 bases Loop-powered False alarms due to factors such as flickering sunlight are avoided by a combination of filters and signal processing techniques
-
Key Features Responds to stationary flames with no flicker Sensitive to UV and low-frequency flickering IR radiation emitted by flames during combustion Compact flame detector which fits into Discovery or XP95 bases Loop-powered False alarms due to electrical discharges from lightning or arc welding and flickering sunlight are minimised
-
Key Features: Responds to stationary flames with no flicker Sensitive to UV radiation emitted by flames during combustion Compact flame detector which fits into Discovery or XP95 bases Loop-powered
-
Key Features: Self-test monitoring Choice of tones on standard device: Apollo, Slow Whoop and DIN Two volume settings 92dB(A) and 100dB(A) Individual and group addressing Synchronisation of tones and flashes Built in isolator Loop-powered IP65 rated
-
Key Features: Sensitive to flickering IR radiation Detects through films of oil, dust, water and ice Responds to flickering flames, including those invisible to the naked eye Compatible with Discovery and XP95 protocols Remote optical self-test function 90 field of view Up to 40m coverage
-
Key Features: Loop-powered Sensitive to flickering IR radiation Detects through films of oil, dust, water and ice Responds to flickering flames, including those invisible to the naked eye False alarms due to lighting or flickering sunlight are minimised Compatible with Discovery and XP95 protocols
-
Key Features: Resettable operating element Easy access, front reset mechanism E-Z fit connector system for installation Ergonomic reset key 170 viewable LED Continuity link for cable insulation testing Suitable for semi flush or surface mounting
-
Key Features: For use with XP95 & Discovery systems Self-test fault monitoring IP65 rated Individual and group addressing Synchronisation of flashes Comes with Isolating Base as standard Loop-powered
-
Key Features: For use with XP95 & Discovery systems Self-test fault monitoring IP65 rated Individual and group addressing Synchronisation of flashes Comes with Isolating Base as standard Loop-powered Red and clear lens option
-
Key Features: Resettable operating element Easy access, front reset mechanism E-Z fit connector system for installation Ergonomic reset key 170 viewable LED Continuity link for cable insulation testing Suitable for semi flush or surface mounting
-
Key Features: Self-test monitoring Choice of tones on standard device: Apollo, Slow Whoop and DIN Two volume settings 92dB(A) and 100dB(A) Individual and group addressing Synchronisation of tones and flashes Built in isolator Loop-powered IP65 rated Red and clear lens options
-
Key Features: Loop-powered Sensitive to flickering IR radiation Detects through films of oil, dust, water and ice Responds to flickering flames, including those invisible to the naked eye False alarms due to lighting or flickering sunlight are minimised Compatible with Discovery and XP95 protocols
-
Key Features: Resettable operating element Easy access, front reset mechanism E-Z fit connector system for installation Ergonomic reset key 170? viewable LED Continuity link for cable insulation testing Suitable for semi flush or surface mounting
