-
For use with Series 65 or Orbis detectors Operates in air speeds of 0.5m/s to 20m/s Transparent cover to view detector head LED Integral smoke test port Volt-free contacts -
For use with Series 65 or Orbis detectors Operates in air speeds of 0.5m/s to 20m/s Transparent cover to view detector head LED Integral smoke test port Volt-free contacts
-
Operates in air speeds of 0.5m/s to 20m/s Transparent cover to view detector head LED Integral smoke test port
-
One-pipe air sampling system Conventional or analogue addressable detectors Test hole on cover Simple installation Sensitive flow indication Simple service and maintenance Installer-friendly connection of cables Foolproof installation of sampling tube Specially designed venturi pipe to ensure optimum performance
-
-
-
-
-
-
-
-
DPK6 for use with FC460PH with built-in 4B-C 4†continuity base. Designed to comply with EN 54-27. One-pipe air sampling system. Patented Cap-up Venturi pipe and duct housing. Test hole on cover. Simple installation. Sensitive flow indicator. Simple service and maintenance. Range of aluminium probe tubes are available for ducts up to 2700 mm.
-
IAS800 twin inlet pipe configuration which can be fitted with two detectors for monitoring one or two pipe runs. IAS801 single inlet pipe configuration which can be fitted with one detector.; Ideal for areas where access is restricted, harsh environments and areas where a point detector would be damaged Powerful Fan Up to two 100m pipe runs available Pipes can be individually monitored for air flow with LED bar graph FireClass loop and 24Vdc connections Fault monitored via the FireClass loop IP65 enclosure Field serviceable air filters Uses standard 25mm VESDA pipe and fittings
-
IAS800 twin inlet pipe configuration which can be fitted with two detectors for monitoring one or two pipe runs. IAS801 single inlet pipe configuration which can be fitted with one detector.; Ideal for areas where access is restricted, harsh environments and areas where a point detector would be damaged Powerful Fan Up to two 100m pipe runs available Pipes can be individually monitored for air flow with LED bar graph FireClass loop and 24Vdc connections Fault monitored via the FireClass loop IP65 enclosure Field serviceable air filters Uses standard 25mm VESDA pipe and fittings
-
Ultra-small, low cost aspirating smoke detector for easy and discreet installation High sensitivity provided by laser based forward light scatter for reliable early warning Single sampling pipe up to 50 m in length (still air) False alarms reduced by unique laser sensing technology - able to discriminate against dust RS485 communications built in as standard for networking and remote communications
-
Ultra-small, low cost aspirating smoke detector for easy and discreet installation High sensitivity provided by laser based forward light scatter for reliable early warning Two sampling pipes up to 100 m (aggregate) in length (still air) False alarms reduced by unique laser sensing technology - able to discriminate against dust RS485 communications built in as standard for networking and remote communications
-
Volt-free Fire-1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems High sensitivity provided by laser based forward light scatter for reliable early warning Four sampling pipes up to 200m (aggregate) in length (still air) False alarms reduced by unique laser sensing technology - able to discriminate against dust RS485 communications built in as standard for networking and remote communications
-
High sensitivity provided by laser based forward light scatter for reliable early warning Four sampling pipes up to 200 m (aggregate) in length (still air) False alarms reduced by unique dust discrimination RS485 communications for networking and remote communications Command Module allows control over other FIRElink units on network
-
Allows air duct sampling using standard detector or sensor Fits either square or round section ducting (with additional brackets) One-tube air sampling system Test hole on cover Simple installation / maintenance Sensitive flow indication Installer-friendly connection of cables
-
Analogue Addressable Smoke Sensors: ACA-E, ACC-E, ALG-E, ALN-E, ATJ-E (all variants) Analogue Addressable Bases: YBN-R/3, YBN-R/3(SCI) (all variants) Conventional Smoke Detectors: SLR-E3, SLR-E3N (all variants) Conventional Bases: YBN-R/6, YBN-R/6SK, YBO-R/6R, YBO-R/6RN and YBO-R/6RS (all variants) Comes with a standard 600mm sampling pipe, other pipe lengths available separately.; Allows air duct sampling using standard detector or sensor Fits either square or round section ducting (with additional bracket) One-tube air sampling system Simple installation/ maintenance with installer-friendly connection of cables Supplied with standard 600mm sampling pipe
-
-
High sensitivity provided by laser based forward light scatter for reliable early warning Unique ClassiFire perceptive artificial intelligence system that dynamically adjusts the detectors operating parameters allowing for day to day changes in the protected environment and system contamination Unwanted alarms from dust are avoided using patented Dual Technology LDD 3D laster dust discrimination and elimination system 4 sampling pipes, up to 250m maximum total length RS485 communications built in as standard for networking and remote communications
-
Data storage units Prison cells Plant rooms Air conditioning units Equipment racks Computer rooms Air duct protection Heritage property protection Critical equipment Anti-smoking enforcement Motor rooms; Ultra-small low-cost aspirating smoke detector for easy and discreet installation High sensitivity provided by laser based forward light scatter for reliable early warning Single sampling pipe up to 50m in length (still air) Unique ClassiFire® Perceptive Artificial Intelligence system that dynamically adjusts the detector’s operating parameters, allowing for day to day changes in the protected environment and dust separation system contamination Unwanted alarms from dust are avoided using patented Dual Technology LDD 3D3 Laser Dust Discrimination and elimination system
-
RS485 communications built in as standard for networking and remote communications Network control of 127 detectors Built in Short Isolators for optimum reliability; Data storage units Prison cells Plant rooms Air conditioning units Equipment racks Computer rooms Air duct protection Heritage property protection Critical equipment Anti-smoking enforcement Motor rooms
-
Data storage units Prison cells Plant rooms Air conditioning units Equipment racks Computer rooms Air duct protection Heritage property protection Critical equipment Anti-smoking enforcement Motor rooms; High sensitivity provided by laser based forward light scatter for reliable early warning Combined sampling pipe up to 200m in length (still air) Unique ClassiFire® Perceptive Artificial Intelligence system that dynamically adjusts the detector’s operating parameters, allowing for day to day changes in the protected environment and dust separation system contamination Unwanted alarms from dust are avoided using patented Dual Technology LDD 3D3 Laser Dust Discrimination and elimination system RS485 communications built in as standard for networking and remote communications Large area aspirating smoke detector, up to 2000m2 coverage CPR, LPCB, VdS, NF, CSIRO, UL & FM approved
-
Data storage units Prison cells Plant rooms Air conditioning units Equipment racks Computer rooms Air duct protection Heritage property protection Critical equipment Anti-smoking enforcement Motor rooms; High sensitivity provided by laser based forward light scatter for reliable early warning Combined sampling pipe up to 200m in length (still air) Unique ClassiFire® Perceptive Artificial Intelligence system that dynamically adjusts the detector’s operating parameters, allowing for day to day changes in the protected environment and dust separation system contamination Unwanted alarms from dust are avoided using patented Dual Technology LDD 3D3 Laser Dust Discrimination and elimination system RS485 communications built in as standard for networking and remote communications Large area aspirating smoke detector, up to 2000m2 coverage CPR, LPCB, VdS, NF, CSIRO, UL & FM approved
-
Modular Design – Separate centrally-controllable detector modules allow efficient piping and discrete zones with no overlap. Zoned aspirating smoke detection – Individual detector modules provide detection for individual areas or zones, specific zone alarm information can be transmitted to the main fire alarm panel via a common APIC address card in the display module or through dedicated alarm relays within each detector module. Simplified installation – Ingenious docking station design allows detectors to be easily connected together as a group. Sensitive electronics are easily removed to ensure they will not be damaged during first fix installation. Aspirating pipework and cable entries can easily be made into either the top or the bottom of the unit. Intuitive user interface – Bright easy-to-see colour TFT display and universal navigation and control buttons take the guesswork out of programming and diagnostics. Easy pipe connection – The quick fit pipe adaptor system locks down securely, yet leaves plenty of room for easy pipe connection and removal. Quick location of smoke – Each detector module is self-contained, which means no delays in determining in which zone (sampling pipe) smoke is present.
-
Modular Design – Separate centrally-controllable detector modules allow efficient piping and discrete zones with no overlap. Zoned aspirating smoke detection – Individual detector modules provide detection for individual areas or zones, specific zone alarm information can be transmitted to the main fire alarm panel via a common APIC address card in the display module or through dedicated alarm relays within each detector module. Simplified installation – Ingenious docking station design allows detectors to be easily connected together as a group. Sensitive electronics are easily removed to ensure they will not be damaged during first fix installation. Aspirating pipework and cable entries can easily be made into either the top or the bottom of the unit. Intuitive user interface – Bright easy-to-see colour TFT display and universal navigation and control buttons take the guesswork out of programming and diagnostics. Easy pipe connection – The quick fit pipe adaptor system locks down securely, yet leaves plenty of room for easy pipe connection and removal. Quick location of smoke – Each detector module is self-contained, which means no delays in determining in which zone (sampling pipe) smoke is present.
-
Modular Design – Separate centrally-controllable detector modules allow efficient piping and discrete zones with no overlap. Zoned aspirating smoke detection – Individual detector modules provide detection for individual areas or zones, specific zone alarm information can be transmitted to the main fire alarm panel via a common APIC address card in the display module or through dedicated alarm relays within each detector module. Simplified installation – Ingenious docking station design allows detectors to be easily connected together as a group. Sensitive electronics are easily removed to ensure they will not be damaged during first fix installation. Aspirating pipework and cable entries can easily be made into either the top or the bottom of the unit. Intuitive user interface – Bright easy-to-see colour TFT display and universal navigation and control buttons take the guesswork out of programming and diagnostics. Easy pipe connection – The quick fit pipe adaptor system locks down securely, yet leaves plenty of room for easy pipe connection and removal. Quick location of smoke – Each detector module is self-contained, which means no delays in determining in which zone (sampling pipe) smoke is present.
-
Modular Design – Separate centrally-controllable detector modules allow efficient piping and discrete zones with no overlap. Zoned aspirating smoke detection – Individual detector modules provide detection for individual areas or zones, specific zone alarm information can be transmitted to the main fire alarm panel via a common APIC address card in the display module or through dedicated alarm relays within each detector module. Simplified installation – Ingenious docking station design allows detectors to be easily connected together as a group. Sensitive electronics are easily removed to ensure they will not be damaged during first fix installation. Aspirating pipework and cable entries can easily be made into either the top or the bottom of the unit. Intuitive user interface – Bright easy-to-see colour TFT display and universal navigation and control buttons take the guesswork out of programming and diagnostics. Easy pipe connection – The quick fit pipe adaptor system locks down securely, yet leaves plenty of room for easy pipe connection and removal. Quick location of smoke – Each detector module is self-contained, which means no delays in determining in which zone (sampling pipe) smoke is present.
-
High sensitivity provided by laser based forward light scatter for reliable early warning Unique ClassiFire perceptive artificial intelligence system that dynamically adjusts the detectors operating parameters allowing for day to day changes in the protected environment and system contamination Unwanted alarms from dust are avoided using patented Dual Technology LDD 3D laster dust discrimination and elimination system 4 sampling pipes, up to 250m maximum total length RS485 communications built in as standard for networking and remote communications
-
High sensitivity provided by laser based forward light scatter for reliable early warning Unique ClassiFire perceptive artificial intelligence system that dynamically adjusts the detectors operating parameters allowing for day to day changes in the protected environment and system contamination Unwanted alarms from dust are avoided using patented Dual Technology LDD 3D laster dust discrimination and elimination system 4 sampling pipes, up to 250m maximum total length RS485 communications built in as standard for networking and remote communications
-
High sensitivity provided by laser based forward light scatter for reliable early warning Unique ClassiFire perceptive artificial intelligence system that dynamically adjusts the detectors operating parameters allowing for day to day changes in the protected environment and system contamination Unwanted alarms from dust are avoided using patented Dual Technology LDD 3D laster dust discrimination and elimination system 4 sampling pipes, up to 250m maximum total length RS485 communications built in as standard for networking and remote communications
-
Small, low cost aspirating smoke detector for easy and discreet installation High sensitive provided by laser based forward light scatter for reliable early warning Two sampling pipes (100m aggregate) for flexibility Unique ClassiFire perceptive artificial intelligence system that dynamically adjusts the detector’s operating parameters allowing for day to day changes in the protected environment and the system contamination Unwanted alarms from dust are avoided using patented dual technology LDD 3D laser dust discrimination and elimination system
-
Small, low cost aspirating smoke detector for easy and discreet installation High sensitive provided by laser based forward light scatter for reliable early warning Two sampling pipes (100m aggregate) for flexibility Unique ClassiFire perceptive artificial intelligence system that dynamically adjusts the detector’s operating parameters allowing for day to day changes in the protected environment and the system contamination Unwanted alarms from dust are avoided using patented dual technology LDD 3D laser dust discrimination and elimination system
-
Ultra small, low cost aspirating smoke detector for easy and discreet installation High sensitivity provide by laser based forward light scatter for reliable early warning Signal sampling pipe up to 50m in length Unique ClassiFire perceptive artificial intelligent system that dynamically adjusts the detector’s operating parameters, allowing for day to day changes in the protect environment and dust separation system contamination Unwanted alarm from dust are avoided using patented Dual Technology LDD 3D Laser Dust Discrimination and elimination system
