-
-
-
PCB mounts inside the CFP fire panel. Outputs are NOT designed to switch mains voltages.
-
Features:; Two wire serial connection Up to 7 boards per system 230V AC or 24V DC powered versions Open collector zonal fault outputs Volt free fire, coincidence and common fault contact outputs
-
Key Features:; PCB version for mounting inside PSU’s, panels, etc. self-contained version in a metal enclosure single gang plate version has ‘Auxiliary Relay Operated’ text custom legend or other language versions on request
-
Haes White Fire Alarm Mains Isolator Switch MISW-W; Secure isolation for fire alarm mains supply voltage Both neutral & live is switched Protection fuse provided Compliant with BS 5839 Pt1:2013 Red or white box Surface or flush fitting Power indicator LED
-
PCB mounts inside the CFP fire panel. Outputs are NOT designed to switch mains voltages.
-
Haes Red Fire Alarm Mains Isolator Switch MISW-R; Secure isolation for fire alarm mains supply voltage Both neutral & live is switched Protection fuse provided Compliant with BS 5839 Pt1:2013 Red or white box Surface or flush fitting Power indicator LED
-
PCB mounts inside the CFP fire panel. Outputs are NOT designed to switch mains voltages.
-
Key Features:; 8 amp relay Suitable for mains switching Suppressed and polarised relay 24v coil Red or white box Surface or flush fitting LED ‘isolated’ indication (yellow) Double pole relay Isolate key switch Selectable internal buzzer on isolation Option switch to energise relay on isolation
-
Key Features:; 8 amp relay Suitable for mains switching Suppressed and polarised relay 24v coil Red or white box Surface or flush fitting LED ‘isolated’ indication (yellow) Double pole relay Isolate key switch Selectable internal buzzer on isolation Option switch to energise relay on isolation
-
Key Features:; Provides four panel-controlled volt free relay outputs (reset, fault, aux. fire and remote) and eight output per zone relays. PCB mounts inside the CFP fire panel. Reset relay is active during the panel’s reset cycle. Fault relay is active in any fault condition. This relay is failsafe and normally energised - if power is removed from the panel the relay will changeover to produce a fault signal. Aux. fire relay is active in an alarm condition provided all relevant delays have expired. Remote relay is active during any Alarm Condition provided all relevant delays have expired. Output per zone relays will changeover when the corresponding zone is in alarm (subject to certain conditions - for full details refer to the instructions, downloadable below). Outputs are NOT designed to switch mains voltages.
-
Key Features:; 8A double pole volt free changeover relay Contacts rated at up to 250vac 24vdc coils, polarised and suppressed ‘Activated’ LED indicator Nylon self-adhesive mounting pillars; All relays polarised and suppressed 24v coils Self-adhesive mounting pillars Relay activated LED indication Fused and un-fused versions
-
Key Features:; Provides four panel-controlled volt free relay outputs (reset, fault, aux. fire and remote). PCB mounts inside the CFP fire panel. Reset relay is active during the panel’s reset cycle. Fault relay is active in any fault condition. This relay is failsafe and normally energised - if power is removed from the panel the relay will changeover to produce a fault signal. Aux. fire relay is active in an alarm condition provided all relevant delays have expired. Remote relay is active during any Alarm Condition provided all relevant delays have expired. Outputs are NOT designed to switch mains voltages.
-
Key Features:; Allows the connection of up to eight CFP760 Repeaters (one CFP761 required per Main, all CFP760 repeaters include a CFP761 as standard) Communicates over screened two-wire fire resistant cable Total repeater network cable length should not exceed 1KM
-
Coils are polarised and suppressed Fused and un-fused versions available 8 amp relays suitable for switching mains
-
Features; Two wire serial connection Up to 7 sounder boards per system 230V AC or 24V DC powered versions Zoned, 2-stage or common alarm All outputs monitored for open and short circuit faults Individual open and short circuit fault indicators Fully monitored by main control panel Class change input facility Up to 8 outputs with 0.5A available from each Can be connected to serial bus with Ancillary boards and repeaters Boxed units in enclosure to match Sigma CP control panels Power fault input for monitoring remote power supplies
-
Key Features:; 8 amp double pole relay Suitable for mains switching Individually fused outputs on fused version Red LED to indicate relay activated
-
Coils are polarised and suppressed Fused and un-fused versions available 8 amp relays suitable for switching mains
-
-
Key Features:; 8 amp double pole relay Suitable for mains switching Individually fused outputs on fused version Red LED to indicate relay activated
-
-
-
Key Features:; PCB version for mounting inside PSU’s, panels, etc. self-contained version in a metal enclosure single gang plate version has ‘Auxiliary Relay Operated’ text custom legend or other language versions on request
-
Key Features:; PCB version for mounting inside PSU’s, panels, etc. self-contained version in a metal enclosure single gang plate version has ‘Auxiliary Relay Operated’ text custom legend or other language versions on request
-
-
Key Features:; High efficiency switched mode power supplies Compact 1A and 2.5A versions Regulated 24vdc supply 3 year warranty as standard Integral load switching relay Supply ‘on’ indication Continuously rated at design load (see over) Mains input range 88-264vac Overload protected
-
Two four or six way units available Integral power supplyRobust steel enclosure Space for 7Ah batteries Power Healthy, Power Fault and Sounder Fault indicators Full fault monitoring and integrity maintained
-
Key Features:; High efficiency switched mode power supplies Compact 1A and 2.5A versions Regulated 24vdc supply 3 year warranty as standard Integral load switching relay Supply ‘on’ indication Continuously rated at design load (see over) Mains input range 88-264vac Overload protected
-
Key Features:; PCB version for mounting inside PSU’s, panels, etc. self-contained version in a metal enclosure single gang plate version has ‘Auxiliary Relay Operated’ text custom legend or other language versions on request
-
Key Features:; direct fit to a single gang deep back box circular flush mounted version available without text text is available in other languages custom legend available on request IP66 weather-proof version available
-
Key Features:; High efficiency switched mode power supply Mini enclosure Regulated 24vdc supply 3 year warranty as standard Integral load switching relay Supply ‘on’ indication Continuously rated at 0.7A Mains input range 100-245vac Overload protected
-
Key Features:; High efficiency switched mode power supplies Compact 1.5A, 3.0A and 5.0A versions Fully compliant to EN54-4 Power and fault indication 3 year warranty as standard A range of power supply equipment with power output options to suit most applications. Wide AC input range on the 3.0A and 5.0A versions All models monitor the battery internal series resistance.
-
C-Tec 24v 5A EN54-4/A2 Boxed Power Supply Unit (VDS Certified); BF362-5; Low current consumption Deep discharge battery protection and EN54 compliant reporting of battery impedance faults Single-pole volt-free changeover relay that switches for any fault condition Three LED indicators - supply present, general fault and auxiliary fault (for optional connection to third-party equipment) Link selectable battery charging capacity Environmentally-friendly charging circuit - dissipates just 0.35W compared to the industry norm of around 2.55W. Optional high-temperature output activates when internal box temperature reaches 55oC, for connection to ventilation fans, etc. Optional handheld status reader (shows internal temperature, charging voltage and current of connected PSU). Serial data link also provided for third-party OEM equipment All boxed versions third-party certified to EN54-4 (1997/A2:2006) by the VdS or LPCB
-
Key Features:; direct fit to a single gang deep back box circular flush mounted version available without text text is available in other languages custom legend available on request IP66 weather-proof version available
-
C-Tec 24v 3A EN54-4/A2 Boxed Power Supply Unit (LPCB Certified) BF362-3; Low current consumption Deep discharge battery protection and EN54 compliant reporting of battery impedance faults Single-pole volt-free changeover relay that switches for any fault condition Three LED indicators - supply present, general fault and auxiliary fault (for optional connection to third-party equipment) Link selectable battery charging capacity Environmentally-friendly charging circuit - dissipates just 0.35W compared to the industry norm of around 2.55W. Optional high-temperature output activates when internal box temperature reaches 55oC, for connection to ventilation fans, etc. Optional handheld status reader (shows internal temperature, charging voltage and current of connected PSU). Serial data link also provided for third-party OEM equipment All boxed versions third-party certified to EN54-4 (1997/A2:2006) by the VdS or LPCB
