-
20 programmable Zonal / 25 System LEDs. Apollo, Argus Vega, Hochiki & Nittan Evolution protocol support. Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware. Dedicated USB & RS232 serial port for direct PC or modem connection. Installer friendly Auto-learn, Loop Detection and On-board Scope facility for ease of commissioning and fault finding. The graphical display can be configured to operate with virtually any language or character set, and allow the installer's logo to be applied using the Logo application software. Integral P-Bus for system expansion via available option cards. Ad-NeT peer-to-peer network with up to 2000 zones Approved to BS EN54 part 2, 4 and 13. -
All major device manufacturers devices supported Optional, local or remote printers Walk test facility Provide up to 72hr stand-by (subject to verification) Supporting a total of five industry leading protocols, Apollo, Hochiki ESP, Nittan, Morley-IAS and System Sensor Simple, robust design to EN54 Parts 2 & 4 Facility to print history and event logs Report & Control System - For multiple building sites where information is presented at the local and master panels only 99 panel network allows systems in excess of 60,000 devices to be managed
-
With A compact enclosure (380mm x 365mm x 110mm) and a single PCB with on-board power supply (1.5A), the ID60 provides the user with an easy to install/maintain Fire Alarm System.; LPCB approved to EN54 Parts 2 and 4 One loop capacity (99 sensors and 99 modules) 16 fire zones, 16 non fire zones Supports advanced detection such as VIEW™ HARSH™ OptiPlex HAZARD™ 64 CBE rules 10 Pre-alarm levels per sensor 9 Alarm levels per sensor Drift compensation Maintenance alert Automatic High Test Day / Night mode facility Time programs Class Change “Autolearn” facility One man “walk test” 2 x 40 character backlit LCD Active and passive repeaters Programmable from the panel keypad or PC Supports loop powered sounders & relays Two on board sounder circuits Two on board configurable outputs
-
20 programmable Zonal / 25 System LEDs. Apollo, Argus Vega, Hochiki & Nittan Evolution protocol support. Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware. Dedicated USB & RS232 serial port for direct PC or modem connection. Installer friendly Auto-learn, Loop Detection and On-board Scope facility for ease of commissioning and fault finding. The graphical display can be configured to operate with virtually any language or character set, and allow the installer's logo to be applied using the Logo application software. Integral P-Bus for system expansion via available option cards. Ad-NeT peer-to-peer network with up to 2000 zones Approved to BS EN54 part 2, 4 and 13.
-
20 programmable Zonal / 25 System LEDs. Apollo, Argus Vega, Hochiki & Nittan Evolution* protocol support. Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware. Dedicated USB & RS232 serial port for direct PC or modem connection. Installer friendly Auto-learn, Loop Detection and On-board Scope facility for ease of commissioning and fault finding. The graphical display can be configured to operate with virtually any language or character set, and allow the installer's logo to be applied using the Logo application software. Integral P-Bus for system expansion via available option cards. Ad-NeT peer-to-peer network with up to 2000 zones Approved to BS EN54 part 2, 4 and 13.
-
20 programmable Zonal / 25 System LEDs. Apollo, Argus Vega, Hochiki & Nittan Evolution protocol support. Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware. Dedicated USB & RS232 serial port for direct PC or modem connection. Installer friendly Auto-learn, Loop Detection and On-board Scope facility for ease of commissioning and fault finding. The graphical display can be configured to operate with virtually any language or character set, and allow the installer's logo to be applied using the Logo application software. Integral P-Bus for system expansion via available option cards. Ad-NeT peer-to-peer network with up to 2000 zones Approved to BS EN54 part 2, 4 and 13.
-
All major device manufacturers devices supported Optional, local or remote printers Walk test facility Provide up to 72hr stand-by (subject to verification) Supporting a total of five industry leading protocols, Apollo, Hochiki ESP, Nittan, Morley-IAS and System Sensor Simple, robust design to EN54 Parts 2 & 4 Facility to print history and event logs Report & Control System - For multiple building sites where information is presented at the local and master panels only 99 panel network allows systems in excess of 60,000 devices to be managed
-
The ID61 is housed in a slightly larger enclosure (500mm x 400mm x 110mm) than the ID60 to accommodate for an internal mounted printer. A larger separate power supply (3A) is fitted in the ID61 to cater for the more power hungry applications.; LPCB approved to EN54 Parts 2 and 4 One loop capacity (99 sensors and 99 modules) 16 fire zones, 16 non fire zones Supports advanced detection such as VIEW™ HARSH™ OptiPlex HAZARD™ 64 CBE rules 10 Pre-alarm levels per sensor 9 Alarm levels per sensor Drift compensation Maintenance alert Automatic High Test Day / Night mode facility Time programs Class Change “Autolearn” facility One man “walk test” 2 x 40 character backlit LCD Active and passive repeaters Programmable from the panel keypad or PC Supports loop powered sounders & relays Two on board sounder circuits Two on board configurable outputs
-
Key Features:; Fully expandable from 2 - 8 loops via plug-in loop driver boards. 20 programmable Zonal / 25 System LEDs with slide-in labels. Dedicated loop driver for Apollo or Hochiki protocol support. Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware. Dual flash-based microprocessor technology with real-time clock on-board. Dedicated USB & RS232 serial port for direct PC or modem connection. Installer friendly Auto-learn, Loop Detection and On-board Scope facility for ease of commissioning and fault finding. Fully programmable via the on-board alphanumeric keypad, or PC configuration tools. The graphical display can be configured to operate with virtually any language or character set, and allow the installer's logo to be applied using the Logo application software. Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination. 2 x 5 Amp power supply and charger to En54 part 4. Integral P-Bus for system expansion via available option cards. Ad-NeT peer-to-peer network with up to 2000 zones.
-
Compatible with all Morley-IAS intelligent multiprotocol fire alarm control panels Connects to RS485 peripheral bus Active or Passive options Backlit adjustable alphanumeric display General status LEDs Controls for system reset, accept, mute, silence alarms, and self-test (active repeater only) “Access Enable” key-switch on active repeater
-
Fully expandable from 2 - 8 loops via plug-in loop driver boards. 20 programmable Zonal / 25 System LEDs with slide-in labels. Dedicated loop driver for Apollo or Hochiki protocol support. Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware. Dual flash-based microprocessor technology with real-time clock on-board. Dedicated USB & RS232 serial port for direct PC or modem connection. Installer friendly Auto-learn, Loop Detection and On-board Scope facility for ease of commissioning and fault finding. Fully programmable via the on-board alphanumeric keypad, or PC configuration tools. The graphical display can be configured to operate with virtually any language or character set, and allow the installer's logo to be applied using the Logo application software. Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination. 2 x 5 Amp power supply and charger to En54 part 4. Integral P-Bus for system expansion via available option cards. Ad-NeT peer-to-peer network with up to 2000 zones.
-
Fully expandable from 2 - 8 loops via plug-in loop driver boards. 20 programmable Zonal / 25 System LEDs with slide-in labels. Dedicated loop driver for Apollo or Hochiki protocol support. Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware. Dual flash-based microprocessor technology with real-time clock on-board. Dedicated USB & RS232 serial port for direct PC or modem connection. Installer friendly Auto-learn, Loop Detection and On-board Scope facility for ease of commissioning and fault finding. Fully programmable via the on-board alphanumeric keypad, or PC configuration tools. The graphical display can be configured to operate with virtually any language or character set, and allow the installer's logo to be applied using the Logo application software. Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination. 2 x 5 Amp power supply and charger to En54 part 4. Integral P-Bus for system expansion via available option cards. Ad-NeT peer-to-peer network with up to 2000 zones.
