-
Fully expandable from 2 - 8 loops via plug-in loop driver boards. 20 programmable Zonal / 25 System LEDs with slide-in labels. Dedicated loop driver for Apollo or Hochiki protocol support. Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware. Dual flash-based microprocessor technology with real-time clock on-board. Dedicated USB & RS232 serial port for direct PC or modem connection. Installer friendly Auto-learn, Loop Detection and On-board Scope facility for ease of commissioning and fault finding. Fully programmable via the on-board alphanumeric keypad, or PC configuration tools. The graphical display can be configured to operate with virtually any language or character set, and allow the installer's logo to be applied using the Logo application software. Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination. 2 x 5 Amp power supply and charger to En54 part 4. Integral P-Bus for system expansion via available option cards. Ad-NeT peer-to-peer network with up to 2000 zones. -
Long term service and support Supports 1 MXDigital loop with125 addresses 2 KM loop length 16 way zonal LED display High level User Interface with "Front Panel Controls" to reduce lifetime cost of ownership Wide range of detectors including the 3oTec triple sensing detection. Early detection without false alarms. Wide range of ancillaries including door control to BS7273 category A Matching 16 Zone Fully Functional Mains powered Repeater DDA compliance using the advanced 3000 series AV Base and loop powered sounder beacons. Approved to EN54 the system is designed to be installed to BS5839 Easy programming when using MXConsys Express configuration tool.
-
Key Features:; Full colour 7” (800 x 480 pixel) GUI (Graphical User Interface) Replicates information displayed at the FACP Automatic display brightness adjustment Internal buzzer attenuate Connects via control panel network terminals Low current, 24V DC powered Configurable functionality Enable key-switch Sheet steel enclosure
-
Compatible with all Morley-IAS intelligent multiprotocol fire alarm control panels Connects to RS485 peripheral bus Active or Passive options Backlit adjustable alphanumeric display General status LEDs Controls for system reset, accept, mute, silence alarms, and self-test (active repeater only) “Access Enable” key-switch on active repeater
-
4.3 inch touch screen Easy to use configuration software Full cause and effect programming at Panel or PC Configuration tool Up to 254 devices on the loop 254 zones available Network Card built in for networking up to 16 panels Remote Access via the “Nittan Portal” (Future Development) 2 x configurable rs485 ports Up to 8 password protected users Switch mode power supply EN 54 part 2 and part 4
-
Fully expandable from 2 - 8 loops via plug-in loop driver boards. 20 programmable Zonal / 25 System LEDs with slide-in labels. Dedicated loop driver for Apollo or Hochiki protocol support. Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware. Dual flash-based microprocessor technology with real-time clock on-board. Dedicated USB & RS232 serial port for direct PC or modem connection. Installer friendly Auto-learn, Loop Detection and On-board Scope facility for ease of commissioning and fault finding. Fully programmable via the on-board alphanumeric keypad, or PC configuration tools. The graphical display can be configured to operate with virtually any language or character set, and allow the installer's logo to be applied using the Logo application software. Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination. 2 x 5 Amp power supply and charger to En54 part 4. Integral P-Bus for system expansion via available option cards. Ad-NeT peer-to-peer network with up to 2000 zones.
-
Key Features:; Fully expandable from 2 - 8 loops via plug-in loop driver boards. 20 programmable Zonal / 25 System LEDs with slide-in labels. Dedicated loop driver for Apollo or Hochiki protocol support. Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware. Dual flash-based microprocessor technology with real-time clock on-board. Dedicated USB & RS232 serial port for direct PC or modem connection. Installer friendly Auto-learn, Loop Detection and On-board Scope facility for ease of commissioning and fault finding. Fully programmable via the on-board alphanumeric keypad, or PC configuration tools. The graphical display can be configured to operate with virtually any language or character set, and allow the installer's logo to be applied using the Logo application software. Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination. 2 x 5 Amp power supply and charger to En54 part 4. Integral P-Bus for system expansion via available option cards. Ad-NeT peer-to-peer network with up to 2000 zones.
-
Key Features:; Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB). Compatibility with Apollo’s XP95/Discovery protocol. Two independently programmable conventional sounder circuits. Two programmable inputs. A fault output relay and three programmable relay outputs with voltage free changeover contacts. A selection of zone dependency/coincidence functions. A day/night (building occupied/unoccupied) function. An investigation delay period function. Phased evacuation facility. An alarm counter that records how many times the panel has been in alarm state. Powerful short circuit protected loop drivers, capable of supporting up to 40 loop powered 10mA sounders per loop. An integral EN54-4/A2 switch mode power supply. Adjustable contamination levels. Earth fault monitoring. Combined keypad / keyswitch entry to Access Levels 2 and 3. 999 event monitoring. An intuitive Windows based upload-download PC program. Up to eight XFP main panels (any variant) can be connected onto a two-wire RS485 network. Alternatively, up to eight XFP repeaters can be connected to any non-networked main panel.
-
EN54-2 / EN54-4 certified 7” full colour resistive touch screen display - Intuitive user interface 8 slot version, each slot supporting a 2-loop detection card 2 to 16 detection loops 500mA loop current Multiple protocols supported on a single panel 0, 48, 96 or 144 zone indicators Enable control key switch as standard Front loading printer option (0 and 48 zone panels) Standard panel supports up to 26Ah batteries 5.25A and 10.25A EN54-4 power supply options (on 4 slot panels) Deep enclosure option for 45Ah batteries (using the 10.25A PSU) Network up to 128 panels 4 programmable sounder outputs 5 programmable relays 3 programmable inputs 24 programmable soft “function keys” 10000 event log, with filtering Spare slots may be used to add more inputs/outputs Connectivity enabled using the Media Gateway card
-
Key Features:; Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB). Compatibility with Apollo’s XP95/Discovery protocol. Two independently programmable conventional sounder circuits. Two programmable inputs. A fault output relay and three programmable relay outputs with voltage free changeover contacts. A selection of zone dependency/coincidence functions. A day/night (building occupied/unoccupied) function. An investigation delay period function. Phased evacuation facility. An alarm counter that records how many times the panel has been in alarm state. Powerful short circuit protected loop drivers, capable of supporting up to 40 loop powered 10mA sounders per loop. An integral EN54-4/A2 switch mode power supply. Adjustable contamination levels. Earth fault monitoring. Combined keypad / keyswitch entry to Access Levels 2 and 3. 999 event monitoring. An intuitive Windows based upload-download PC program. Up to eight XFP main panels (any variant) can be connected onto a two-wire RS485 network. Alternatively, up to eight XFP repeaters can be connected to any non-networked main panel.
-
EN54-2 / EN54-4 certified 7” full colour resistive touch screen display - Intuitive user interface 4 slot version, each slot supporting a 2-loop detection card 2 to 8 detection loops 500mA loop current Multiple protocols supported on a single panel 0, 48, 96 or 144 zone indicators Enable control key switch as standard Front loading printer option (0 and 48 zone panels) Standard panel supports up to 26Ah batteries 5.25A and 10.25A EN54-4 power supply options (on 4 slot panels) Deep enclosure option for 45Ah batteries (using the 10.25A PSU) Network up to 128 panels 4 programmable sounder outputs 5 programmable relays 3 programmable inputs 24 programmable soft “function keys” 10000 event log, with filtering Spare slots may be used to add more inputs/outputs Connectivity enabled using the Media Gateway card
-
Fully expandable from 2 - 8 loops via plug-in loop driver boards. 20 programmable Zonal / 25 System LEDs with slide-in labels. Dedicated loop driver for Apollo or Hochiki protocol support. Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware. Dual flash-based microprocessor technology with real-time clock on-board. Dedicated USB & RS232 serial port for direct PC or modem connection. Installer friendly Auto-learn, Loop Detection and On-board Scope facility for ease of commissioning and fault finding. Fully programmable via the on-board alphanumeric keypad, or PC configuration tools. The graphical display can be configured to operate with virtually any language or character set, and allow the installer's logo to be applied using the Logo application software. Robust removable equipment chassis with plug-in connectors for simple fixing and cable termination. 2 x 5 Amp power supply and charger to En54 part 4. Integral P-Bus for system expansion via available option cards. Ad-NeT peer-to-peer network with up to 2000 zones.
