-
A value of 1 (=Sounder fault) this means there was no sound detected in 5 seconds of the sounder being switched on. A value of 2 (=VAD fault) means there is no current being drawn by the LED’s. A value of 3 (=Sounder and VAD fault) where neither of the above elements are operating correctly.; EN54-23 approved Flash rate of 0.5Hz Synchronisation of 'alert' and 'evacuate' tones Synchronisation of visual indicator flash Individual and group addressing Unique acoustic and VAD self-test Built in isolator -
EN54-23 approved Flash rate of 0.5Hz Synchronisation of VAD flash Individual and group addressing Unique VAD self-test Loop-powered Built in isolator
-
Uses high intensity LED (white flash only) EN 54-23 Compliant Category C. VAD Coverage C-3-8.5 Automatic LED check when VAD activated Flash rate 0.5Hz Fault signal if LED check failed Locking mechanism (grub screw) Wide angle of visibility Synchronised with the Apollo Protocol
-
Uses high intensity LED (white flash only) EN 54-23 Compliant Category C. VAD Coverage C-3-8.5 Automatic LED check when VAD activated Flash rate 0.5Hz Fault signal if LED check failed Locking mechanism (grub screw) Wide angle of visibility Synchronised with the Apollo Protocol
-
EN54-23 certified Flash rate of 0.5Hz It is possible to set individual volume of the sounder from the panel 15 pairs of tones including IMO code 1A 'General Emergency Alarm' and IMO Code 2 'All Clear' Built in isolator; Brand Information
-
Individual control of the sounder and visual indicator Volume and tone settings can be selected from the control panel Tones can be used for other purposes in addition to warning of fire, making the device ideal for use in schools etc Soft start option, ideal for hospitals and nursing homes Group and global control for increased response time
-
Application:; It is possible to set individual control of the sounder and visual indicator Volume and tone settings can be selected from the control panel Electronic bell tone IMO 1A tone included
-
Key Features:; 15 tone pairs It is possible to set individual control of the sounder and visual indicator Volume and tone settings can be selected from the control panel Tones can be used for other purposes in addition to warning of fire, making the device ideal for use in schools etc. Soft start option, ideal for hospitals and nursing homes Group and global control for increased response time
-
Key Features:; 4 pre-set message pairs, capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Key Features:; 4 pre-set message pairs, capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Brand Information:; 15 pairs of tones It is possible to set individual volume of the sounder from the fire control panel Tones can be used for other purposes in addition to warning of fire, ideal for schools Enables soft start option, ideal for hospitals and nursing homes Unique acoustic and visual indicator self-test
-
Key Features:; It is possible to set individual control of the sounder and visual indicator Volume and tone settings can be selected from the control panel Tones can be used for other purposes in addition to warning of fire, ideal for schools Enables soft start option, ideal for hospitals and nursing homes Electronic bell tone
-
Four pre-set message pairs Capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Four pre-set message pairs Capable of up to 15 tone message pairs Low current and high volume Fully synchronised Set up and test at point of installation
-
Two tones Two volume ranges 55-75dB(A) and 75-91dB(A) Individual and group addressing Unique acoustic self-test
-
Key Features:; Indoor use The Intelligent Base Sounder complies with the requirements of EN54–3: 2001.
-
Self-test monitoring Choice of tones on standard device: Apollo, Slow Whoop and DIN Two volume settings 92dB(A) and 100dB(A) Individual and group addressing Synchronisation of tones and flashes Built in isolator Loop-powered IP65 rated
-
Key Features:; Self-test fault monitoring Choice of tones on standard device: Apollo, Slow Whoop and DIN Two volume settings 92dB(A) and 100dB(A) Synchronisation of tones Individual and group addressing Built in isolator Red or white options Loop-powered IP65 rated
-
Self-test fault monitoring Choice of tones on standard device: Apollo, Slow Whoop and DIN Two volume settings 92dB(A) and 100dB(A) Synchronisation of tones Individual and group addressing Built in isolator Red or white options Loop-powered IP65 rated
-
Key Features:; For use with XP95 & Discovery systems Self-test fault monitoring IP65 rated Individual and group addressing Synchronisation of flashes Comes with Isolating Base as standard Loop-powered Red and clear lens option
-
High intensity LEDs More reliable than xenon visual indicators Automatic LED check Lockable Wide angle of visibility Enables DDA compliance Synchronised flash Can be used with Discovery or XP95
-
High intensity LEDs More reliable than xenon visual indicators Automatic LED check Lockable Wide angle of visibility Enables DDA compliance Synchronised flash Can be used with Discovery or XP95
-
Operation:; Choice of tones on standard device: Apollo, Slow Whoop and DIN IP66 rated Synchronisation of tones Individual and group addressing Non-isolated Output 100dB(A)
-
Operation:; Choice of tones on standard device: Apollo, Slow Whoop and DIN IP66 rated Synchronisation of tones Individual and group addressing Non-isolated Output 100dB(A)
