-
Operation:; Choice of tones on standard device: Apollo, Slow Whoop and DIN IP66 rated Synchronisation of tones Individual and group addressing Non-isolated Output 100dB(A) -
Operation:; Choice of tones on standard device: Apollo, Slow Whoop and DIN IP66 rated Synchronisation of tones Individual and group addressing Non-isolated Output 100dB(A)
-
Application:; It is possible to set individual control of the sounder and visual indicator Volume and tone settings can be selected from the control panel Electronic bell tone IMO 1A tone included
-
802SB Loop Powered Sounder Base Minerva MX; Manufactuered to EN54 part 3 Integral Sounder and Detector Base Volume and tone adjustable after installation Low Power Synchronisation Does not require use of a standard base (maybe installed directly onto a standard besa box)
-
Employs fully digital Hyfire protocol Built in loop isolators Fully Intelligent Selection of 32 tones Synchronised sounder Adjustable volume output Auto-addressable Programmable via Device Programming Tool Compatible with all Altair detectors 5-year product warranty Includes device identification tab Easy central cable entry
-
Employs fully digital Hyfire protocol Built in loop isolators Offers full programming options Selection of 32 tones Synchronised sounder 360 degree visibility of VID when activated Adjustable volume output Auto-addressable via compatible panels Programmable via the Device Programming tool 5 year product warranty Includes device identification tab Easy central cable entry
-
EN54-23 certified Flash rate of 0.5Hz It is possible to set individual volume of the sounder from the panel 15 pairs of tones including IMO code 1A 'General Emergency Alarm' and IMO Code 2 'All Clear' Built in isolator; Brand Information
-
-
-
Please Note: This item does not include a sounder.
-
-
-
-
-
Loop Powered Single Loop Address - addressed via the TCH-B100 Hand Held Programmer Variable Sound Output 90 ~ 102 dB(A) (+/-2 dB(A)) output at 1 metre Fits Hochiki Standard or Isolator Base Weatherproof Kit available 51 User-Selectable Tones (all tones EN54-3 compatible) Also available in white Approved by LPCB & VdS
-
Loop Powered Single Loop Address - addressed via the TCH-B100 Hand Held Programmer Variable Sound Output 90 ~ 102 dB(A) (+/-2 dB(A)) output at 1 metre Fits Hochiki Standard or Isolator Base Weatherproof Kit available 51 User-Selectable Tones (all tones EN54-3 compatible) Also available in red Approved by LPCB & VdS
-
A value of 1 (=Sounder fault) this means there was no sound detected in 5 seconds of the sounder being switched on. A value of 2 (=VAD fault) means there is no current being drawn by the LED’s. A value of 3 (=Sounder and VAD fault) where neither of the above elements are operating correctly.; EN54-23 approved Flash rate of 0.5Hz Synchronisation of 'alert' and 'evacuate' tones Synchronisation of visual indicator flash Individual and group addressing Unique acoustic and VAD self-test Built in isolator
-
EN54-23 approved Flash rate of 0.5Hz Synchronisation of VAD flash Individual and group addressing Unique VAD self-test Loop-powered Built in isolator
-
Third-party certified to EN54-3 (Sounders) and EN54-17 (Isolators) by Intertek (pending) Impressive 90dB(A) sound output @ 1m Onboard short-circuit loop isolator 5mA alarm current @24V DC (sounder on max) Attractively finished in red polycarbonate Group addressing facility allows multiple devices to be operated simultaneously 7 selectable volume levels and up to 15 selectable tone pairs Attractive compact design - just 102mm diameter, 63mm deep Includes an integrated sounder to base locking mechanism IP21C rated Low current consumption means multiple devices can be connected to the loop DIP switch addressed Simple ‘click and twist’ design and easy-fit base ensures rapid installation time Also available in a white plastic housing (order code BF450A/CX/SW)
-
Key Features:; Compatible with Ziton addressable fire panels Connection layout with easy wiring and connection on installation Powered directly from the ZP loop for small installations, or externally when many units are required Fully addressable LED technology for long service life and low current consumption, maximising the number of devices on a loop Unique optics for light management with a lens design that optimises light dispersal, minimising power wastage Up to 7.5m coverage diameter, reducing the number of devices required to cover an area Coverage switch feature - for smaller areas switch down from 7.5m to 2.5m, reducing power consumption and saving up to 50% Flash rate switch feature, reducing the power consumption by up to 50% Soft start up for reduced current peak at start up, reducing circuit loading Locking base to prevent easy removal of device 8 Selectable tones with 4 selectable output levels IP66 rated for ingress protection in harsh environments EN54-3 and EN54-23 approved and CPR certified
-
Key Features:; Compatible with Ziton addressable fire panels Connection layout with easy wiring and connection on installation Powered directly from the ZP loop for small installations, or externally when many units are required Fully addressable LED technology for long service life and low current consumption, maximising the number of devices on a loop Unique optics for light management with a lens design that optimises light dispersal, minimising power wastage Up to 7.5m coverage diameter, reducing the number of devices required to cover an area Coverage switch feature - for smaller areas switch down from 7.5m to 2.5m, reducing power consumption and saving up to 50% Flash rate switch feature, reducing the power consumption by up to 50% Soft start up for reduced current peak at start up, reducing circuit loading Locking base to prevent easy removal of device 8 Selectable tones with 4 selectable output levels EN54-3 and EN54-23 approved and CPR certified
-
Key Features:; Compatible with Ziton addressable fire panels Connection layout with easy wiring and connection on installation Powered directly from the ZP loop for small installations, or externally when many units are required Fully addressable LED technology for long service life and low current consumption, maximising the number of devices on a loop Unique optics for light management with a lens design that optimises light dispersal, minimising power wastage Up to 7.5m coverage diameter, reducing the number of devices required to cover an area Coverage switch feature - for smaller areas switch down from 7.5m to 3m, reducing power consumption and saving up to 50% Flash rate switch feature, reducing the power consumption by up to 50% Soft start up for reduced current peak at start up, reducing circuit loading Locking base to prevent easy removal of device EN54-23 approved and CPR certified
-
Key Features:; Compatible with Ziton addressable fire panels Connection layout with easy wiring and connection on installation Powered directly from the ZP loop for small installations, or externally when many units are required Fully addressable LED technology for long service life and low current consumption, maximising the number of devices on a loop Unique optics for light management with a lens design that optimises light dispersal, minimising power wastage Up to 7.5m coverage diameter, reducing the number of devices required to cover an area Coverage switch feature - for smaller areas switch down from 7.5m to 2.5m, reducing power consumption and saving up to 50% Flash rate switch feature, reducing the power consumption by up to 50% Soft start up for reduced current peak at start up, reducing circuit loading Locking base to prevent easy removal of device EN54-23 approved and CPR certified
-
Key Features:; Compatible with Ziton addressable fire panels Connection layout with easy wiring and connection on installation Powered directly from the ZP loop for small installations, or externally when many units are required Fully addressable LED technology for long service life and low current consumption, maximising the number of devices on a loop Unique optics for light management with a lens design that optimises light dispersal, minimising power wastage Up to 7.5m coverage diameter, reducing the number of devices required to cover an area Coverage switch feature - for smaller areas switch down from 7.5m to 2.5m, reducing power consumption and saving up to 50% Flash rate switch feature, reducing the power consumption by up to 50% Soft start up for reduced current peak at start up, reducing circuit loading Locking base to prevent easy removal of device 8 Selectable tones with 4 selectable output levels EN54-3 and EN54-23 approved and CPR certified
