-
Operation:; Choice of tones on standard device: Apollo, Slow Whoop and DIN IP66 rated Synchronisation of tones Individual and group addressing Non-isolated Output 100dB(A) -
Operation:; Choice of tones on standard device: Apollo, Slow Whoop and DIN IP66 rated Synchronisation of tones Individual and group addressing Non-isolated Output 100dB(A)
-
Application:; It is possible to set individual control of the sounder and visual indicator Volume and tone settings can be selected from the control panel Electronic bell tone IMO 1A tone included
-
802SB Loop Powered Sounder Base Minerva MX; Manufactuered to EN54 part 3 Integral Sounder and Detector Base Volume and tone adjustable after installation Low Power Synchronisation Does not require use of a standard base (maybe installed directly onto a standard besa box)
-
Employs fully digital Hyfire protocol Built in loop isolators Fully Intelligent Selection of 32 tones Synchronised sounder Adjustable volume output Auto-addressable Programmable via Device Programming Tool Compatible with all Altair detectors 5-year product warranty Includes device identification tab Easy central cable entry
-
Employs fully digital Hyfire protocol Built in loop isolators Offers full programming options Selection of 32 tones Synchronised sounder 360 degree visibility of VID when activated Adjustable volume output Auto-addressable via compatible panels Programmable via the Device Programming tool 5 year product warranty Includes device identification tab Easy central cable entry
-
EN54-23 certified Flash rate of 0.5Hz It is possible to set individual volume of the sounder from the panel 15 pairs of tones including IMO code 1A 'General Emergency Alarm' and IMO Code 2 'All Clear' Built in isolator; Brand Information
-
-
-
Please Note: This item does not include a sounder.
-
-
-
-
-
Loop Powered Single Loop Address - addressed via the TCH-B100 Hand Held Programmer Variable Sound Output 90 ~ 102 dB(A) (+/-2 dB(A)) output at 1 metre Fits Hochiki Standard or Isolator Base Weatherproof Kit available 51 User-Selectable Tones (all tones EN54-3 compatible) Also available in white Approved by LPCB & VdS
-
Loop Powered Single Loop Address - addressed via the TCH-B100 Hand Held Programmer Variable Sound Output 90 ~ 102 dB(A) (+/-2 dB(A)) output at 1 metre Fits Hochiki Standard or Isolator Base Weatherproof Kit available 51 User-Selectable Tones (all tones EN54-3 compatible) Also available in red Approved by LPCB & VdS
-
A value of 1 (=Sounder fault) this means there was no sound detected in 5 seconds of the sounder being switched on. A value of 2 (=VAD fault) means there is no current being drawn by the LED’s. A value of 3 (=Sounder and VAD fault) where neither of the above elements are operating correctly.; EN54-23 approved Flash rate of 0.5Hz Synchronisation of 'alert' and 'evacuate' tones Synchronisation of visual indicator flash Individual and group addressing Unique acoustic and VAD self-test Built in isolator
-
EN54-23 approved Flash rate of 0.5Hz Synchronisation of VAD flash Individual and group addressing Unique VAD self-test Loop-powered Built in isolator
-
Third-party certified to EN54-3 (Sounders) and EN54-17 (Isolators) by Intertek (pending) Impressive 90dB(A) sound output @ 1m Onboard short-circuit loop isolator 5mA alarm current @24V DC (sounder on max) Attractively finished in red polycarbonate Group addressing facility allows multiple devices to be operated simultaneously 7 selectable volume levels and up to 15 selectable tone pairs Attractive compact design - just 102mm diameter, 63mm deep Includes an integrated sounder to base locking mechanism IP21C rated Low current consumption means multiple devices can be connected to the loop DIP switch addressed Simple ‘click and twist’ design and easy-fit base ensures rapid installation time Also available in a white plastic housing (order code BF450A/CX/SW)
-
Key Features:; Compatible with Ziton addressable fire panels Connection layout with easy wiring and connection on installation Powered directly from the ZP loop for small installations, or externally when many units are required Fully addressable LED technology for long service life and low current consumption, maximising the number of devices on a loop Unique optics for light management with a lens design that optimises light dispersal, minimising power wastage Up to 7.5m coverage diameter, reducing the number of devices required to cover an area Coverage switch feature - for smaller areas switch down from 7.5m to 2.5m, reducing power consumption and saving up to 50% Flash rate switch feature, reducing the power consumption by up to 50% Soft start up for reduced current peak at start up, reducing circuit loading Locking base to prevent easy removal of device 8 Selectable tones with 4 selectable output levels IP66 rated for ingress protection in harsh environments EN54-3 and EN54-23 approved and CPR certified
-
Key Features:; Compatible with Ziton addressable fire panels Connection layout with easy wiring and connection on installation Powered directly from the ZP loop for small installations, or externally when many units are required Fully addressable LED technology for long service life and low current consumption, maximising the number of devices on a loop Unique optics for light management with a lens design that optimises light dispersal, minimising power wastage Up to 7.5m coverage diameter, reducing the number of devices required to cover an area Coverage switch feature - for smaller areas switch down from 7.5m to 2.5m, reducing power consumption and saving up to 50% Flash rate switch feature, reducing the power consumption by up to 50% Soft start up for reduced current peak at start up, reducing circuit loading Locking base to prevent easy removal of device 8 Selectable tones with 4 selectable output levels EN54-3 and EN54-23 approved and CPR certified
-
Key Features:; Compatible with Ziton addressable fire panels Connection layout with easy wiring and connection on installation Powered directly from the ZP loop for small installations, or externally when many units are required Fully addressable LED technology for long service life and low current consumption, maximising the number of devices on a loop Unique optics for light management with a lens design that optimises light dispersal, minimising power wastage Up to 7.5m coverage diameter, reducing the number of devices required to cover an area Coverage switch feature - for smaller areas switch down from 7.5m to 3m, reducing power consumption and saving up to 50% Flash rate switch feature, reducing the power consumption by up to 50% Soft start up for reduced current peak at start up, reducing circuit loading Locking base to prevent easy removal of device EN54-23 approved and CPR certified
-
Key Features:; Compatible with Ziton addressable fire panels Connection layout with easy wiring and connection on installation Powered directly from the ZP loop for small installations, or externally when many units are required Fully addressable LED technology for long service life and low current consumption, maximising the number of devices on a loop Unique optics for light management with a lens design that optimises light dispersal, minimising power wastage Up to 7.5m coverage diameter, reducing the number of devices required to cover an area Coverage switch feature - for smaller areas switch down from 7.5m to 2.5m, reducing power consumption and saving up to 50% Flash rate switch feature, reducing the power consumption by up to 50% Soft start up for reduced current peak at start up, reducing circuit loading Locking base to prevent easy removal of device EN54-23 approved and CPR certified
-
Key Features:; Compatible with Ziton addressable fire panels Connection layout with easy wiring and connection on installation Powered directly from the ZP loop for small installations, or externally when many units are required Fully addressable LED technology for long service life and low current consumption, maximising the number of devices on a loop Unique optics for light management with a lens design that optimises light dispersal, minimising power wastage Up to 7.5m coverage diameter, reducing the number of devices required to cover an area Coverage switch feature - for smaller areas switch down from 7.5m to 2.5m, reducing power consumption and saving up to 50% Flash rate switch feature, reducing the power consumption by up to 50% Soft start up for reduced current peak at start up, reducing circuit loading Locking base to prevent easy removal of device 8 Selectable tones with 4 selectable output levels EN54-3 and EN54-23 approved and CPR certified
-
Key Features:; Detector and sounder from a single wiring point – minimising installation costs Powered directly from the ZP loop Up to 60 detectors with sounders directly on the loop Separate addresses selectable for detector and sounder High efficiency sound gun transducer Compatible with all ZP loop devices Wide range of international sound types and frequencies
-
Cost effective compliance with disability legislation Powered directly from the ZP loop Up to 25 sounder beacons directly on the loop wiring Low current LED based visual element High efficiency sound gun transducer Plug in base - no internal connections Minimises installation points
-
Key Features:; Cost effective compliance with disability legislation Powered directly from the ZP loop Up to 60 beacons directly on the loop wiring Fully addressable Low current LED based visual element Compatible with all ZP loop devices
-
Key Features:; 101dB @ 1m sound output 16 tones can be selected from control panel White Flash rates between 0.33Hz and 1.5Hz Hard addressed via 8 way dip-switch Can also be soft addressed via MKII Handheld Programmer Flush or surface fixing Housed in UL V0 flame retardant ABS 4 x 20mm cable entries (2 top, 2 bottom) First fix, wire to back box technology
-
Wide 'all around' sound distribution Microphone self test facility Plug in base – no internal connections Up to 40 sounders directly on the loop wiring High efficiency sound gun transducer Synchronised outputs
-
Cost effective compliance with disability legislation Powered directly from the ZP loop Up to 20 devices directly on the loop wiring Low current LED based visual element High efficiency sound gun transducer Plug in base – no internal connections Minimises installation points
-
Enhanced sounder circuit integrity and reliability Compliant with EN 54 and BS 5839-1 Certified by LPCB to EN 54 Part 17 and 18 Potential cable savings 45 Sounders per loop System includes BansheeMT and FlashToneMT Can also be used with other sounder and strobe units Multiple interfaces can be installed dependent on size of system Isolator fits into standard base or deep base Signalling device is monitored Incorporates double switch short circuit isolator in sounder base and interface modules Interface module has fail safe operation
-
-
Key Features:; Complies to EN54 parts 3 100dB @ 1m sound output 16 tones can be selected from control panel Hard addressed via 8-way dip switch Can also be soft addressed via MKII handheld programmer Flush or surface fixing Housed in UL VO flame retardant ABS 4 x 20mm cable entries (2 top, 2 bottom) First fix, wire to back box technology
-
A compact and unobtrusive sounder solution Reflective Sound Monitoring (RSM) Light is electronically monitored by the control panel Automatic self-test Indoor and outdoor versions Indoor models can be semi-flush or surface mounted including a choice of shallow or deep back box IP rated option has a deep surface back box Power and data from the loop. No additional wiring or power supplies required Built-in line isolator 16 selectable tones Realistic conventional bell tone 2 selectable volumes 2 selectable flash rates Select the tone volume and flash rate using panel configuration software Independent addressable control of the sounder and beacon Different tones can be used for pre alarm and class change Aesthetically pleasing rectangle wall mount option A locking pin/screw supplied which prevents unauthorized removal
-
Key Features:; Very bright VID beacon Ideal for many general signalling applications Can be grid mounted for industrial applications Five different lens colours available
-
A compact and discrete solution One point of installation for detector, sounder and visual indicator with no additional wiring Reflective Sound Monitoring (RSM) Light is electronically monitored by the control panel Automatic self-test Independent addressable control of the sounder and beacon Built-in line isolator Select the tone, volume and flash rate using panel configuration software 15 selectable tones. Allows users to select the tone with which they are most familiar Realistic conventional bell tone 4 selectable volumes 2 selectable flash rates Different tones can be used for fire alarm and class change VIDs and sounders are synchronised over the entire loop A locking pin supplied with the base which prevents the unauthorized removal of the detector Replace legacy LPSB3000 and LPAV3000
