-
Key Features: Resettable operating element Easy access, front reset mechanism E-Z fit connector system for installation Ergonomic reset key 170? viewable LED Continuity link for cable insulation testing Suitable for semi flush or surface mounting -
Key Features: Detects wiring short-circuits Minimises disruption from short-circuits Automatic de-isolation on the short-circuit removal Up to 20 detectors or their equivalent load, may be installed between isolators
-
The device also has the functionality to test the diagnostics and integrity of the loop to find earth faults etc. The device offers fault-finding capabilities that allow for time spent on-site to be cut down during the commissioning stage of the system installation. The result of this is time reduced on-site for the end-user which reduces the overall costs of installing Apollo systems. -
Key Features: High intensity LEDs More reliable than xenon visual indicators Automatic LED check Lockable Wide angle of visibility Enables DDA compliance Synchronised flash Can be used with Discovery or XP95
-
Key Features: High intensity LEDs More reliable than xenon visual indicators Automatic LED check Lockable Wide angle of visibility Enables DDA compliance Synchronised flash Can be used with Discovery or XP95
-
Key Features: Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under normal conditions Approved for use in marine environments Modern, low-profile design TimeSaver Base for fast installation Transient rejection for false alarm reduction High humidity tolerance at up to 98%RH Wide operating temperature -40C to +70C -
Key Features: Loop-powered Up to 20 detectors can be installed between isolators Allows fully isolated spurs
-
Key Features: Enables sounders to be operated continuously or to be pulsed, one second on, one second off May be synchronised when in pulsed operation External supply monitoring Will accept a load of 8 Amperes
-
Operation: The Marine DIN Rail switch monitor provides four input states to the control equipment: normal, fault, pre-alarm and alarm. The unit has a red LED to indicate an alarm and a yellow LED to indicate a fault condition. The Marine DIN Rail switch monitor is loop-powered and operates at 17-28V DC with protocol voltage pulses of 5-9V. The unit is designed to accept a maximum line resistance of 50ohm. The end-of-line resistor required is 20k ohm.
-
Key Features: Responds to stationary flames with no flicker Sensitive to low-frequency flickering IR radiation emitted by flames during combustion Compact flame detector which fits into Discovery Marine mounting bases Loop-powered False alarms due to factors such as flickering sunlight are avoided by a combination of filters and signal processing techniques
-
Key Features: Responds to stationary flames with no flicker Sensitive to UV radiation emitted by flames during combustion Compact flame detector which fits into Discovery Marine base Loop-powered
-
Key Features: Responds to stationary flames with no flicker Sensitive to low-frequency flickering IR radiation emitted by flames during combustion. Compact flame detector which fits into Discovery Marine bases Loop-powered False alarms due to factors such as flickering sunlight are avoided by a combination of filters and signal processing techniques
-
Key Features: Designed for use where space is limited Isolated as standard Interrupt/non interrupt in one unit Pre-alarm status available Three coloured LEDs giving clear status indication
-
Key Features: Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under normal conditions
-
Key Features: Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under normal conditions
-
Key Features Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under normal conditions
-
Key Features: Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under normal conditions
-
Key Features: Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty or smoky under normal conditions
-
Key Features: Responds to stationary flames with no flicker Sensitive to UV radiation emitted by flames during combustion Compact flame detector which fits into 45681-200MAR base Zone-powered
-
Key Features: Operation with control equipment using XP95 or Discovery protocol Quick and easy stainless steel 2 axis adjustable mounting bracket Ability to detect 0.1m2 flames at a distance of 25m as required by EN54 10
-
The Deckhead Mounting Box is a device which protects bases, sounder bases and sounder visual indicator bases from the ingress of water or other liquids. It is screwed to the soffit and accepts a variety of Apollo bases.
-
Key Features: Can be used across the entire Apollo range Small and discrete Anti-tamper screw to protect against unauthorised removal
-
Key Features: Choice of tones on standard device: Apollo, Slow Whoop and DIN Two volume settings 92dB(A) and 100dB(A) Synchronisation of 'alert' and 'evacuate' tones Individual and group addressing IP21C
-
Key Features: Can be used for applications where smoke detectors are unsuitable Ideal in environments that are dirty or smoky under normal conditions Red flashing LED at StartUp confirms that the device is operating. SensAlert, yellow flashing LED, indicates faulty operation FasTest takes just four seconds to test and confirm detectors are functioning correctly
-
The Orbis Heat Detector monitors temperature by using a single thermistor which provides a voltage output proportional to the external air temperature.
-
Key Features: Can be used for applications where smoke detectors are unsuitable Ideal in environments that are dirty or smoky under normal conditions Red flashing LED at StartUp confirms that the device is operating. SensAlert, yellow flashing LED, indicates faulty operation FasTest takes just four seconds to test and confirm detectors are functioning correctly
-
The Orbis Heat Detector monitors temperature by using a single thermistor which provides a voltage output proportional to the external air temperature
-
Key Features: Can be used for applications where smoke detectors are unsuitable. Ideal in environments that are dirty or smoky under normal conditions. Reduced incidences of false alarms. Increased reliability of detection.
-
Key Features: Can be used for applications where smoke detectors are unsuitable Ideal in environments that are dirty or smoky under normal conditions Red flashing LED at StartUp confirms that the device is operating. SensAlert, yellow flashing LED, indicates faulty operation FasTest takes just four seconds to test and confirm detectors are functioning correctly
-
The Orbis Heat Detector monitors temperature by using a single thermistor which provides a voltage output proportional to the external air temperature.
-
Key Features: Can be used for applications where smoke detectors are unsuitable. Ideal in environments that are dirty or smoky under normal conditions. Reduced incidences of false alarms. Increased reliability of detection.
-
Key Features: Can be used for applications where smoke detectors are unsuitable Ideal in environments that are dirty or smoky under normal conditions Red flashing LED at StartUp confirms that the device is operating. SensAlert, yellow flashing LED, indicates faulty operation FasTest takes just four seconds to test and confirm detectors are functioning correctly
-
The Orbis Heat Detector monitors temperature by using a single thermistor which provides a voltage output proportional to the external air temperature.
-
Key Features: Can be used for applications where smoke detectors are unsuitable. Ideal in environments that are dirty or smoky under normal conditions. Reduced incidences of false alarms. Increased reliability of detection.
-
Key Features: Can be used for applications where smoke detectors are unsuitable Ideal in environments that are dirty or smoky under normal conditions Red flashing LED at StartUp confirms that the device is operating. SensAlert, yellow flashing LED, indicates faulty operation FasTest takes just four seconds to test and confirm detectors are functioning correctly
-
Brand Features TimeSaver Base designed for fast installation StartUp for fast commissioning FasTest reduces maintenance time automatic drift compensation with DirtAlert warning to easily identify dirty detectors SensAlert which indicates that the detector is not operating properly wide voltage and operating temperature ranges optical sensor designed for high reliability and reduced false alarm incidence multisensory smoke detector for detecting fast-burning fires flashing LED option
